ASUS A7M266 multiplier locked?

[Guest]

is it true that are both dip switch enabled and non dip switch enabled versions of this board floating around? for the boards missing the dips, has anyone soldered in the switch? if so, any suggestions for me?
i plan on running:
TBird "C" 1.2 GHz(266) with Swiftech MCW462 peltier
ASUS A7M266
Crucial PC2100 256MB
Annihilator Pro 32MB (for now)

i would like to see how high i can get the chip running stable. but i would like to be able to use the multiplier as the primary overclock, frequency as secondary overclock.

any comments would be greatly appreciated!!!

 

[hmg57]

I've also heard that there are two versions of this board but don't know why ! As for the soldering job, I remember having read somewhere that it was a bit tricky when it gets to the resistor. (There are more missing parts than the dipswitch) I'm letting you the job of discoverin' what tricky means

For more info: http://www6.tomshardware.com/howto/00q3/000808/index.html

I know it's about A7V but it's probably the same thing on A7M266, not sure. Anyway, good luck !

Fuzzy Wuzzy was a bear, Fuzzy Wuzzy had no hair...<P ID="edit"><FONT SIZE=-1><EM>Edited by hmg57 on 04/04/01 05:46 PM.</EM></FONT></P>