Archived from groups: alt.comp.periphs.mainboard.asus (
More info?)
In article <41dbf6f8$1@e-post.inode.at>, "Roman Cwienk"
<NOSPAMr.cwienk@telering.at> wrote:
> "Homer" <homer@mymamas.com> schrieb im Newsbeitrag
> news:MKSdnaZtA_MHaEbcRVn-tQ@rogers.com...
> > Replace the cell on the mother board if the time is changing when the
> > computer is off. If it is doing it when the computer is on then I have
> seen
> > some programs in the past that do this, they alter timing on the board
> when
> > they are running. It may be a problem with the mother board but I would
> look
> > at the other items first.
> >
>
> Thanks.
>
> The problems appears only when XP is runnning. The battery is OK, I've
> measured the voltage.
> I alreday thought about a connection between this problem and some programs.
> A lot of programs run on my PC.
> If there is any list on the web, which says which programs can cause this
> problem?
>
> Best regards
> Roman.
There is a long thread on nforcershq forums about this. They tried
a number of solutions, and disabling APIC in BIOS is a solution
that works for some people. Disabling APIC is also a workaround
for problems in Linux (it could well be in the kernel code now
for all I know). I vaguely remember some mention of spurious
interrupts when APIC is enabled. (Note - I am not saying ACPI,
which is Advanced Configuration and Power Interface. It is OK
to use the ACPI HAL in Windows, as far as I know. APIC is
Advanced Programmable Interrupt Controller, and when APIC is
enabled in the BIOS, you'll see more than 16 IRQs in use by
Windows. When you disabled APIC in the BIOS, the Windows
allocation method will take the BIOS change into account,
and redistribute the IRQs to fit the reduced number space.)
It is too bad Nvidia doesn't publish errata for their
chipsets, so customers will know what to do.
See the quoted text in the fifth post down on this page.
If you have time, read the whole thread, as many people
spent time battling this problem. An alternate way to
try to solve the problem, is have a permanent Internet
connection and use NTP to resync the faulty clock.
http://nforcershq.com/forum/viewtopic.php?t=19631&start=190
HTH,
Paul