So I noticed my cpu was running at really hot temps, so I take off my cooler, put new thermal paste on, and put the cooler back on. I turn the pc back on and get no display but with error 55 on my motherboard.
Here’s what i’ve tried:
Loosening the cooler
tightening the cooler
reseating the cpu
resetting the cmos
tested each stick of ram individually (got the same error)
unplggged everything except for the cpu power, 24 pin connector, ram, and cooler
i’ve checked for any broken/bent pins on the motherboard
does anyone know why this is happening?
Here’s what i’ve tried:
Loosening the cooler
tightening the cooler
reseating the cpu
resetting the cmos
tested each stick of ram individually (got the same error)
unplggged everything except for the cpu power, 24 pin connector, ram, and cooler
i’ve checked for any broken/bent pins on the motherboard
does anyone know why this is happening?