ASUS P2B-L & PIII450 o'clock

[Guest]

Any ideas on how to o'clock this setup? Without to much damage? I am planning to upgrade but not for a few months. Broke ain't the word!! I want to squeeze as much out of my current PC as I can!!
I built the rig but never done overclocking!!

Asus P2B-L
PIII450
164MB PC100 RAM
Hercules Nvidia TNT card AGP
Siig ULTRA/ATA66 PCI Card
Zoom 56k Modem
Hauppauge WinTV card
SBLive Platinum

Thanks a bunch for your input!!

Jason R.

 

[Unolocogringo]

i have the p2b with a p3 450 SL35D and run it at 133 fsb to make it a 600. at this speed the pci is still in spec but the agp will run at 89 mhz.a good heatsink is a must and of course good case ventilation. your memory may also hold you back so to start set it at its slowest setting or spd. for stability i had to up the voltage by covering pins A-119,B-119and B-121 on the processor to get 2.2 volts.Tom has an article in the archives which explains this in more detail.also changing the I/O voltage from 3.3 to 3.6 may help with memory stability. at 103, 112, 124 fsb your pci will also run out of spec. but if your cards can take it it should not be a problem. very good board