Asus P8Z68/Gen3 Deluxe POST Issue


Feb 18, 2012
I have an Asus P8Z68/Gen3 Deluxe Motherboard that I am having troubles getting to run. During POST it looks to go through the steps and eventually stops. The Q-code at the time things able to halt is A2 and the BOOT_DEVICE_LED is RED. In addition, I am not able to view anything on the monitor because it does not detect a signal from the PC. Do you have any suggestions what might be causing boot device and the monitor issues?

The configuration for this motherboard is:

ASUS P8Z68/GEN3 Deluxe
CPU INTEL Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost)
RAM CORSAIR CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Power Supply OCZ ZX Series 850W Fully-Modular 80PLUS Gold High Performance
2xHD Seagate Barracuda 1TB 72000rpm
VGA PowerColor ATI X1950XT