Question Asus P8Z77-M PRO no post

[Tdom]

Hi,

So yesterday I installed a new cooler on my build. After plugging everything I get the memlock red led on and no beep from de board.
The fans are working properly but no signal on my mouse and keyboard.
I've tried to unplug and plug everything again but the same happens!

My build:

Asus P8Z77-M PRO
MSI RX580 8GB Armor
1 stick of 8GB RAM
INTEL i7-3770K

Thank you very much

 

[RememberThe5th]

Which cooler?
If its mount with screws try to loosen it a bit, it should never ever be overtighnen.
If its clip based (Like stock intel), try the old cooler.

 

[cin19]

I've tried to unplug and plug everything again but the same happens!

Including the cpu ? and did you use the new thermal paste too? How about try put back the old cooler. Because maybe the bent pin, or the cooler was not correctly installed.

 

[Tdom]

Which cooler?
If its mount with screws try to loosen it a bit, it should never ever be overtighnen.
If its clip based (Like stock intel), try the old cooler.

HI it's a cooler master H412R!

 

[Tdom]

Including the cpu ? and did you use the new thermal paste too? How about try put back the old cooler. Because maybe the bent pin, or the cooler was not correctly installed.

Yessir, I did everything I should. Just tried the old one and it's the same

 

[cin19]

Do you check the cpu socket to see there is any bent pin or not?

 

[Tdom]

Hey guys, it was a RAM problem.... They board is not accepting the ram stick very well. I played around with it, turning the pc on and off, with and without the stick and at some point there was life. It beeped like crazy but with the post beep at the start thank you very much everyone