ASUS Rampage II Extreme memory configuration help needed.

[Teejay2]

Hello all.

I have a ASUS Rampage II Extreme motherboard with KHX12800D3/2G 3x 2gb Kingston hyperx memory pc12800 1600 MHz.It says 1.9 V on them. As 6 gb is getting to old and slow I want to upgrade to more. Question is which? I am not the super smart when it comes to computers so was hoping anyone here knows what to do or to get.
I have been looking this site here:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131352

Memory:
Number of Memory Slots 6×240pin Memory Standard DDR3 2000(O.C.) / 1800(O.C.) / 1600(O.C.) / 1333 Maximum Memory Supported 24GB Channel Supported: Triple Channel.
I know it says 24 gb is max. whould that be 6x 4 gb memory? or 3x 8 gb memory? And what about the other slots if i use 8 gb memory? If it is even possible to use 8 gb memory?
I have been looking at this memory here:
https://www.dustinhome.dk/product/5010820914/hyperx-predator

Any help on resolving this issue would be greatly apreciated.
Thanks in advance.
Thomas.

 

[Calvin7]

I suggest using a single triple channel kit.

Model F3-12800CL9T2-24GBRL
http://www.newegg.com/global/nl/Product/Product.aspx?Item=N82E16820231359

http://www.gskill.com/en/product/f3-12800cl9t2-24gbrl

This reviewer claims this 3 x 8GB 1333MHz kit works well in his EVGA x58 SLI LE, but is not available for shipping to Netherlands.
http://www.newegg.com/global/nl/Product/Product.aspx?Item=N82E16820239268

 

[Tradesman1]

Your rig supports 24GB in a 6x4GB config, 8GB sticks aren't supported. Best bet will be a 6x4GB set, there's no guarantees when trying to add a set of DRAM to another set that they will play together

 

[Teejay2]

Thanks for the answers. I have ordered G.Skill Sniper DDR3-1600 C9 TC - 12GB 3 x 4 GB (Triple Channel), DIMM 240-pin, DDR3, 1600 MHz / PC3-12800, CL9-9-9-24, 1.25 V Since the ripjaws could not be delivered to my country using newegg. I hope these are as good as the ripjaws.