ASUS X99 DELUXE 4-Way SLI for New Build!

[NajemAbaakil]

I'm building a new PC and for a motherboard I've selected the ASUS X99 Deluxe. Though this probably won't be an issue for another year or so, can you have a 4 Way SLI using this Mobo. What about 3 Way SLI?

 

[popatim]

Normally you select a equipment for having the features you want, not selecting it first and then checking. This board cannot do 4way sli as the pcie slots are too close together IMO. 3-way is workable.

 

[NajemAbaakil]

Normally you select a equipment for having the features you want, not selecting it first and then checking. This board cannot do 4way sli as the pcie slots are too close together IMO. 3-way is workable.

The reason selected the board before checking is because I found its features to be the best I could find, in my country, where motherboards are hard to find in the first place. Also, I wasn't even sure I was going to run 4-way SLI, and I still might not. Thanks for the answer! I guess I'll be running 3-way SLI until I can get a anew Mobo. XD

 

[Eliomiller]

i think you live somewhere in MEA.but 3 way sli isn't recommended as its the BADEST scaling and is very poorly optimized.its worst than 2 way sli.

 

[Nate_Moise]

First, the board runs 2 or 3 way SLI. It's a very, very good board, and really, this is the only place it falls short as an enthusiast level board. Second; The scaling issues with 3 way SLI were already mentioned, but it is worth noting. The board does its best to compensate, but your far, far better off getting 2 cards and spending the savings in other areas of the build.