New build ASUS Z87 Deluxe Motherboard
CPU Core I7-4770K 3.5G 4C 8M
Corsair CMPSU-850AX power supply
G.SKILL F3-2666C11Q-16GTXD 4Gx4 Memory
Samsung SSD 840 Pro Series 256G MZ-7PD256BW R
Gigabyte GV-R7970C-3GD HD7970 R Video Card
The computer will only boot to a screen if memory is only in dimm slots B1 and/or B2. If I put memory in slots A1 and/or A2 the system will not boot it will only start up and run 5-10 seconds then reboot run 5-10 seconds and reboot over and over and over.
When the system boots with memory in only slots B1 and/or B2 the speaker beeps once and the following screen is displayed.
ASUS Z87-DELUXE ACPI BIOS REVISION 0801
CPU I7-4770K CPU@ 3.50GHZ
SPEED 3500MHZ
TOTAL MEMORY 8192MB (DDR3-1600)
USB DEVICES TOTAL: 0 DRIVE, 3 KEYBOARD, 1 MOUSE, 3 HUBS
SATA PORT 1: SAMSUNG SSD 840 PRO SERI
SATA PORT 3: PIONEER BD-RW BDR-208M
SATA PORT 4: PIONEER BD-RW BDR-208M
PLEASE ENTER SETUP TO RECOVER BIOS SETTING
PRESS F1 TO RUN SETUP
Q Code displayed on motherboard is 00 A2
Pressing F1 on the keyboard has no effect.
Pressing the delete key during boot has no effect.
Pressing Ctrl-Alt-Delete reboots to the same screen.
Pressing the DirectKey button reboots to the same screen.
Does anybody have any idea what the problem is bad motherboard, memory or CPU?
CPU Core I7-4770K 3.5G 4C 8M
Corsair CMPSU-850AX power supply
G.SKILL F3-2666C11Q-16GTXD 4Gx4 Memory
Samsung SSD 840 Pro Series 256G MZ-7PD256BW R
Gigabyte GV-R7970C-3GD HD7970 R Video Card
The computer will only boot to a screen if memory is only in dimm slots B1 and/or B2. If I put memory in slots A1 and/or A2 the system will not boot it will only start up and run 5-10 seconds then reboot run 5-10 seconds and reboot over and over and over.
When the system boots with memory in only slots B1 and/or B2 the speaker beeps once and the following screen is displayed.
ASUS Z87-DELUXE ACPI BIOS REVISION 0801
CPU I7-4770K CPU@ 3.50GHZ
SPEED 3500MHZ
TOTAL MEMORY 8192MB (DDR3-1600)
USB DEVICES TOTAL: 0 DRIVE, 3 KEYBOARD, 1 MOUSE, 3 HUBS
SATA PORT 1: SAMSUNG SSD 840 PRO SERI
SATA PORT 3: PIONEER BD-RW BDR-208M
SATA PORT 4: PIONEER BD-RW BDR-208M
PLEASE ENTER SETUP TO RECOVER BIOS SETTING
PRESS F1 TO RUN SETUP
Q Code displayed on motherboard is 00 A2
Pressing F1 on the keyboard has no effect.
Pressing the delete key during boot has no effect.
Pressing Ctrl-Alt-Delete reboots to the same screen.
Pressing the DirectKey button reboots to the same screen.
Does anybody have any idea what the problem is bad motherboard, memory or CPU?