Hello,
The (essentials) hardware components of my new system are as follow:
CPU: 2 Xeon QA92 (2687w ES)
MB: Asus Z9PE-D8 WS
PSU: Seasonic 1000W Platinum
Memory: 4x8GB Samsung ECC/REG 1600 Mhz
GPU: Nvidia 7800GT (temporary,for test only)
Now my problem is that I can't get post with 2 cpu togheter: if I use only socket 1, then both cpu seems to work just fine and the system boot flawless.
I checked all the four ram modules and no problem found.
I replaced GPU card with another from ATI: same issue (no post/boot with the 2 cpu on the 2 sockets - boot and start with just one cpu on socket 1)
I switched power cables from socket 1 to 2 and viceversa: same issue ---> I don't have another PSU that can handle this system so I can't be 100% sure but does not seems to me that the PSU it's the problem here...
I updated the bios to the last version (503): same issue / "updated" to the first version (311): same issue
The problem is that i get NO post, NO boot: after pressing the power button the CPU's fan
rotates for a few seconds then the system stop : NOTE THAT THE Q-CODE DISPLAY STAYS OFF!!! (with one cpu on socket 1 it works perfectly)
Any idea/suggestion?
The MB it's faulty? Some setting in bios need to be changed?
Thank you very much for any reply
The (essentials) hardware components of my new system are as follow:
CPU: 2 Xeon QA92 (2687w ES)
MB: Asus Z9PE-D8 WS
PSU: Seasonic 1000W Platinum
Memory: 4x8GB Samsung ECC/REG 1600 Mhz
GPU: Nvidia 7800GT (temporary,for test only)
Now my problem is that I can't get post with 2 cpu togheter: if I use only socket 1, then both cpu seems to work just fine and the system boot flawless.
I checked all the four ram modules and no problem found.
I replaced GPU card with another from ATI: same issue (no post/boot with the 2 cpu on the 2 sockets - boot and start with just one cpu on socket 1)
I switched power cables from socket 1 to 2 and viceversa: same issue ---> I don't have another PSU that can handle this system so I can't be 100% sure but does not seems to me that the PSU it's the problem here...
I updated the bios to the last version (503): same issue / "updated" to the first version (311): same issue
The problem is that i get NO post, NO boot: after pressing the power button the CPU's fan
rotates for a few seconds then the system stop : NOTE THAT THE Q-CODE DISPLAY STAYS OFF!!! (with one cpu on socket 1 it works perfectly)
Any idea/suggestion?
The MB it's faulty? Some setting in bios need to be changed?
Thank you very much for any reply