Question ATX motherboard doesn't fit properly in ATX case

[Sidney.A]

Hello,

I bought some new PC parts recently and my new motherboard doesn't fit correctly.

I kept my old case which not only supports ATX, but worked with my previous ATX board just fine.

My motherboard is Gigabyte z390 Aorus Ultra ( https://pcpartpicker.com/product/n6...ltra-atx-lga1151-motherboard-z390-aorus-ultra ).
My case is NZXT Phantom ( https://pcpartpicker.com/product/T2yFf7/nzxt-case-phan003pk ).

Is gigabyte not conforming to the standards anymore? Not sure why the screws won't line up. They're off by a few mm - can see part of the hole for the screw but not enough to get the screws in.

 

[Wolfshadw]

It fits. Start with the screw closed to the rear I/O ports. Then move to the screw hole furthest from it. Once those two are in place, the remaining ones should line up.

-Wolf sends

 

[Sidney.A]

It fits. Start with the screw closed to the rear I/O ports. Then move to the screw hole furthest from it. Once those two are in place, the remaining ones should line up.

-Wolf sends

I'll try that, I appreciate your help.