Hi,
So, I'm in my first build. Here are the parts.
PCPartPicker Part List
CPU: AMD Ryzen 5 3400G 3.7 GHz Quad-Core Processor ($189.99 @ Canada Computers)
CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler ($29.99 @ Amazon Canada)
Motherboard: MSI B450M PRO-VDH MAX Micro ATX AM4 Motherboard ($104.25 @ Vuugo)
Memory: GeIL EVO POTENZA 16 GB (2 x 8 GB) DDR4-3200 Memory
Memory: GeIL EVO POTENZA 16 GB (2 x 8 GB) DDR4-3200 Memory
Storage: Crucial MX500 500 GB M.2-2280 Solid State Drive ($89.99 @ Amazon Canada)
Case: Phanteks P300 ATX Mid Tower Case ($79.98 @ Amazon Canada)
Power Supply: EVGA BR 500 W 80+ Bronze Certified ATX Power Supply ($67.50 @ Vuugo)
Case Fan: ARCTIC F12 PWM PST - Value Pack 53 CFM 120 mm Fans ($43.62 @ Amazon Canada)
Total: $605.32
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2020-02-23 07:44 EST-0500
I bought to sets of RAM seperately, but they are the same exact model.
Now that I've read a bit more, might not have been a great idea, anyways.
Here is what I've done.
BIOS is up to date. I've resetted the CMOS by removing the battery.
I've tried all 4 sticks individually and they work, I've tested 1 module in each of the 4 slots and they work.
I can run any of the sticks in dual Mode in the proper slots (DIMMA2 & DIMMB2). With XMP Profile set to run at 3200 MHZ.
I was able to boot at default speed (2333 MHZ) with 3 modules (DIMMA1, DIMMA2 & DIMMB2), but it won't boot with XMP Profile.
I cannot boot in any shape or form with 4 modules on the motherboard.
Any suggestions are welcome. Am I just stuck with RAM that cannot work properly together ?
I've read about playing with voltage & timings, but I'm not sure where to start.
Thanks!
So, I'm in my first build. Here are the parts.
PCPartPicker Part List
CPU: AMD Ryzen 5 3400G 3.7 GHz Quad-Core Processor ($189.99 @ Canada Computers)
CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler ($29.99 @ Amazon Canada)
Motherboard: MSI B450M PRO-VDH MAX Micro ATX AM4 Motherboard ($104.25 @ Vuugo)
Memory: GeIL EVO POTENZA 16 GB (2 x 8 GB) DDR4-3200 Memory
Memory: GeIL EVO POTENZA 16 GB (2 x 8 GB) DDR4-3200 Memory
Storage: Crucial MX500 500 GB M.2-2280 Solid State Drive ($89.99 @ Amazon Canada)
Case: Phanteks P300 ATX Mid Tower Case ($79.98 @ Amazon Canada)
Power Supply: EVGA BR 500 W 80+ Bronze Certified ATX Power Supply ($67.50 @ Vuugo)
Case Fan: ARCTIC F12 PWM PST - Value Pack 53 CFM 120 mm Fans ($43.62 @ Amazon Canada)
Total: $605.32
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2020-02-23 07:44 EST-0500
I bought to sets of RAM seperately, but they are the same exact model.
Now that I've read a bit more, might not have been a great idea, anyways.
Here is what I've done.
BIOS is up to date. I've resetted the CMOS by removing the battery.
I've tried all 4 sticks individually and they work, I've tested 1 module in each of the 4 slots and they work.
I can run any of the sticks in dual Mode in the proper slots (DIMMA2 & DIMMB2). With XMP Profile set to run at 3200 MHZ.
I was able to boot at default speed (2333 MHZ) with 3 modules (DIMMA1, DIMMA2 & DIMMB2), but it won't boot with XMP Profile.
I cannot boot in any shape or form with 4 modules on the motherboard.
Any suggestions are welcome. Am I just stuck with RAM that cannot work properly together ?
I've read about playing with voltage & timings, but I'm not sure where to start.
Thanks!