Bent pin on cpu

Heroesneverquit

Honorable
Feb 13, 2013
251
0
10,810
So I was disassembling a computer. I undid the thing holding the fan to the cpu. The cpu was stuck to the fan though. So when I removed the fan the CPU came right with it and I never had to undo the lever. I am assuming this is what caused the one bent pin.

In any event I bent the pin back to its original shape and got it unstuck from the cooler. Should the cpu run the same now that its pin was bent back correctly or will it be slower?
 
Solution
If the pin isn't bent back properly there could be micro cracks internally where the pin attaches to the substrate. There's no telling what that might cause but you're right about the harm already being done if any.
Well the video link is blocked at my work, but I understand it can screw up a CPU. My point was, there's no harm in trying to test it. Any damage that could be done already has been done. I've had an occasion where I had to bend 3 pins on an FX 8320 back into place due to poor packaging and shipping, and PC booted up fine. Typically, unless you break the pin in the process of the bend, you should be fine, as the contact remains.
 

ram1009

Distinguished
If the pin isn't bent back properly there could be micro cracks internally where the pin attaches to the substrate. There's no telling what that might cause but you're right about the harm already being done if any.
 
Solution