I'm not sure if this is the correct place to post this, but I will try to describe my problem as best I can.
I just bought a PNY nVidia 6200 256MB graphics card. I installed it, and have been playing around with it for a few days. I changed the primary display to the 6200 in windows, and then noticed that during teh start up of my computer, I couldnt see anything. So i pulled the monitor coord and connected it directly to my mobo, and changed the display in the bios.
For some reason I still have a problem. After the initial BIOS boots, it goes black, and i gave it about 2 minutes before I would shutdown and had to change the display back to the mobo via the BIOS. Then after exiting bios the black screen asking which bootup mode I wanted was displayed. It said something about possibly being from a recent hardware change.
I don't remember this happening when I first got the card a few days ago.
I can only see this display when the primary display is selected as the integrated graphics through BIOS.
No matter what when/if the computer makes it into windows the display goes through the 6200.
I am able to enter the BIOS through both displays. it is only that screen between BIOS and windows that only displays through integrated graphics, and only when integrated is selected in BIOS.
Any ideas would be awesome.
I have been using RivaTuner v2.09 and I am pretty sure it only will let me OC when "auto" (6200) is chosen in bios. I am also not sure it is booting up as OC. I'm very tired and can't remmeber all the things i've done/specific results.
ANYTHING HELPS!
Thanks everyone!
I just bought a PNY nVidia 6200 256MB graphics card. I installed it, and have been playing around with it for a few days. I changed the primary display to the 6200 in windows, and then noticed that during teh start up of my computer, I couldnt see anything. So i pulled the monitor coord and connected it directly to my mobo, and changed the display in the bios.
For some reason I still have a problem. After the initial BIOS boots, it goes black, and i gave it about 2 minutes before I would shutdown and had to change the display back to the mobo via the BIOS. Then after exiting bios the black screen asking which bootup mode I wanted was displayed. It said something about possibly being from a recent hardware change.
I don't remember this happening when I first got the card a few days ago.
I can only see this display when the primary display is selected as the integrated graphics through BIOS.
No matter what when/if the computer makes it into windows the display goes through the 6200.
I am able to enter the BIOS through both displays. it is only that screen between BIOS and windows that only displays through integrated graphics, and only when integrated is selected in BIOS.
Any ideas would be awesome.
I have been using RivaTuner v2.09 and I am pretty sure it only will let me OC when "auto" (6200) is chosen in bios. I am also not sure it is booting up as OC. I'm very tired and can't remmeber all the things i've done/specific results.
ANYTHING HELPS!
Thanks everyone!