Hello folks, hopefully everybody is having a good Sunday.
Folks, I am trying to install a Samsung 950 Pro M.2 NVME drive to a Gigabyte H470M-DS3H mainboard. Nothing I do in Bios including an update will recognize this drive. When I move the drive to another mainboard (Gigabyte Z170XP-SLI) it works flawlessly.
What I am doing wrong here? I tried 2 other drives (an WDC &Nionix Kioxia brand) and they work fine in either slot - so the slots are good.
The specs for the mainboard says: "Dual NVMe PCIe Gen3 X4 M.2 Slots" and the exact words on the drive is " V-Nand SSD 950 Pro M.2 NVM Express MODEL MZ-VKV512"
Losing my mind.
Many thanks in advance!
EDIT: the WD drive that works fine in the H470M-DS3H is a SN730 NVM SSD OPAL and the Kioxia is a KBG40ZNS128G NVME SSD
Thanks again,
Daniella
Folks, I am trying to install a Samsung 950 Pro M.2 NVME drive to a Gigabyte H470M-DS3H mainboard. Nothing I do in Bios including an update will recognize this drive. When I move the drive to another mainboard (Gigabyte Z170XP-SLI) it works flawlessly.
What I am doing wrong here? I tried 2 other drives (an WDC &
The specs for the mainboard says: "Dual NVMe PCIe Gen3 X4 M.2 Slots" and the exact words on the drive is " V-Nand SSD 950 Pro M.2 NVM Express MODEL MZ-VKV512"
Losing my mind.
Many thanks in advance!
EDIT: the WD drive that works fine in the H470M-DS3H is a SN730 NVM SSD OPAL and the Kioxia is a KBG40ZNS128G NVME SSD
Thanks again,
Daniella
Last edited: