Hello guys!
Rig:
-motherboard: Biostar G31-M7 TE
-cpu upgrage: P4 3Ghz --> E8400 @3Ghz -1333
-ram upgrade: Elixir 1Gb+2Gb --> Samsung 2x2Gb 800mhz
-OS: Windows 7 32bit
-hard drives: dvdrom IDE + hdd SATA
What is the problem with this MoBo ? Should I expect to do that again (not see SATA hdd) ?
Should I upgrade chip controller drivers?
Rig:
-motherboard: Biostar G31-M7 TE
-cpu upgrage: P4 3Ghz --> E8400 @3Ghz -1333
-ram upgrade: Elixir 1Gb+2Gb --> Samsung 2x2Gb 800mhz
-OS: Windows 7 32bit
-hard drives: dvdrom IDE + hdd SATA
- After doing these upgrades, my MoBo didn't see the SATA hdd.
I changed the ports from Sata 4 to Sata 3 and the Windows successfully
1st day- After Windows 7 finished installing updates, it worked well and nice for 5 hours then I shut off the PC
2nd day- Turned on PC -> very slow boot , and after 1 hour I got "memory error xxxxxxxx", PC turned off
3rd time- Changed Sata 3 back to Sata 4 -> PC can recognize SATA Hdd, but after 1 hour I get the same message "memory error xxxxxx" -> PC shuts off and restores to its default state in BIOS and SATA hdd doesn't get recognized (only Floppy)
What is the problem with this MoBo ? Should I expect to do that again (not see SATA hdd) ?
Should I upgrade chip controller drivers?