[SOLVED] Biostar Racing B350ET2 Motherboard With Ryzen 3600

[Johnnybegood947]

Hi,

I am aware that this is not the best board for this chip and will be doing a moba upgrade in the future.

I wanted to know what problems I would encounter outside of performance loss.

View: https://www.youtube.com/watch?v=keJSMCpm9lU


The video above is a build using the CPU and moba combo and its where I got the idea to do this in the first place as I already own that board and paired it with a 2200G.

My main concern is breaking something because of inadequate VRM's etc.

If a bit of performance is lost and no harm could come from doing this combo then I can get the CPU first and use it until I can do the other upgrades.

Thanks for the help

 

[CountMike]

4 stage bare VRM is not good for any OC.

 

[Johnnybegood947]

4 stage bare VRM is not good for any OC.

If I keep it completely stock will I be fine ?

 

[CountMike]

If I keep it completely stock will I be fine ?

Yes, 3600 uses even less power than 1600 or 2600 for instance. Or maybe even stick something like this on them https://modmymods.com/air-cooling/ram-vrm-heatsinks.html

 

[Johnnybegood947]

Ok cool, so I can go ahead with this plan and not worry too much then?

 

[CountMike]

Ok cool, so I can go ahead with this plan and not worry too much then?

I wouldn't as there should be better MBs for price but yes, at stock speeds for 6 core it should be OK.

 

[Johnnybegood947]

I wouldn't as there should be better MBs for price but yes, at stock speeds for 6 core it should be OK.

I agree fully but given I already own that board might as well use it

 

[CountMike]

I agree fully but given I already own that board might as well use it

See if you can get and stick some of those heat sinks, I did that few times and it worked as well as factory ones.

 

[Johnnybegood947]

See if you can get and stick some of those heat sinks, I did that few times and it worked as well as factory ones.

Are you talking about those baby ones? Don't think they sell them here where I am :/

 

[Johnnybegood947]

Are you talking about those baby ones? Don't think they sell them here where I am :/

https://www.diyelectronics.co.za/store/accessories/1675-copper-heat-sink-for-raspberry-pi.html

something like these ?

 

[CountMike]

https://www.diyelectronics.co.za/store/accessories/1675-copper-heat-sink-for-raspberry-pi.html

something like these ?

Yes. they'd be fine, just don't know if they are self adhesive.

 

[Johnnybegood947]

I'll give them a shot. Thank you for the help