Question Black Screen after upgrading my RAM

[d1sappeared]

i have bought additional set or rams which are different of which i have in terms of the body , but identical in the specification , but when i put every thing together i got nothing on my screen but when i plug only either the new or the old ram individually display works again !!

old ram
CMU16GX4M2C3000C15R
new ram
CMK16GX4M2B3000C15

 

[Gam3r01]

RAM is only guaranteed to work in the kit its sold in. You could buy two identical kits on the same day and have them not work.
Most of the time it will work to some extent, but sometimes as you found, it wont work at all.

 

[d1sappeared]

RAM is only guaranteed to work in the kit its sold in. You could buy two identical kits on the same day and have them not work.
Most of the time it will work to some extent, but sometimes as you found, it wont work at all.

so there is no walk around to solve this issue ? 😱

 

[Gam3r01]

Not really, no.
You can return the new kit and see if a different one will work, its all just luck of the draw at this point.

 

[d1sappeared]

Not really, no.
You can return the new kit and see if a different one will work, its all just luck of the draw at this point.

i will try to return it , but what if i buy another kit like the one i just bought ,i will might be in the same situation or no ?

 

[arif1752002m4a1]

plug all RAMs. Then Reset BIOS by shorting(CLR_CMOS pins)

 

[d1sappeared]

plug all RAMs. Then Reset BIOS by shorting(CLR_CMOS pins)

i will give it a try , thank you

 

[d1sappeared]

plug all RAMs. Then Reset BIOS by shorting(CLR_CMOS pins)

it worked

thank you very much