blue screen error :(

[mmlaa]

hi guys ,
my system win7 x64
my system on ssd by (caddy drive)
because the old internal ssd have problem anyway ,I am disabled old ssd , and windows working well , but after enabled old sdd and format it to add as d:/ ,here cause the problem now windows get me this error "mbr error 1 insert floppy disk and press any key" 🙁
but sloved this problem by remove the old ssd and windows working first time well ,so shutdown it to back screws to laptop ,after finished the window get me blue screen error 🙁 not booting !!!!!!

what's happened and what i do , !?

plz help , i am sure its configuration issue '/

 

[Hamperking68]

Try disconnecting the SSD again.

Also, make sure you reset the CMOS and Re-Seat the RAM.

Do you know what the bugcode was by any chance?

 

[mmlaa]

this screen shot by my phone for bsc error
https://s16.postimg.org/p4ye5p5et/IMG_20170221_063048.jpg

 

[mmlaa]

how remove new harddriver controller???

 

[Paul NZ]

Did you enable AHCI in the BIOS if it was disabled or on IDE mode when windows was installed?

Did you install windows on the old SSD on this computer?? Or was it from / on another computer?

This stop error is sata hdd related. It's because AHCI is enabled, it wasnt when windows was installed

And it'll crash because it cant find the hdd (no sata drivers were installed, when windows was installed)

 

[mmlaa]

no old sdd empty without system .
no option about AHCI in bios ,but after attachment old ssd i see option hide/displaying configuration raid , but now no options because i remove it .

 

[mmlaa]

my laptop vaio / bios is InsydeH2O

 

[mmlaa]

I think if disabled old ssd under devices manager in Windows that's work , but how i can doing this without enter to system ??