Hello there!
Iam here to ask you for some technical advices on an issue im having on my new (and first) pc build.
Here are the specs:
MOBO: MSI B550 Gaming GEN3
CPU: Ryzen 5 5600
GPU: XFX Radeon RX 6600
Memory: Lexar thor 2x8GB DDR4 3200MHz
Storage: crucial ssd 1tb
PSU: MSI MAG A660BN
WIFI Module installed also
Iam encountering permanent red cpu light but fans are spinning and their rgb is on and i have no display at all.
I tried flashing the BIOS with the latest (and also tried some older) version from the MSI Mobo support site, renamed the p60 file into MSI.ROM etc. but nothing seems to happen after the 7-10 minutes the bios takes to upgrade.
I also tried updating it with no components mounted as many people wrote on forums but without at least the cpu mounted the mobo wont turn on, so i tried with only cpu mounted on it.
I even followed a guide on removing CMOS battery to reset bios then flashed it again but nothing, zero display.
With only cpu mounted it gave me a DRAM Red light debug (obv there were no rams!) then i installed a stick of ram and it came back to Red CPU light.
Strange thing is that if i have everything mounted on and i remove all rams the CPU Led stays ON and DRAM wont turn on instead.
I've ran out of debug tries, i tried literally everything i found online.
The thing that makes me crazy is i havent seen a single output display at all and i havent figured out where is the problem.
I'd be glad if you had some advice for me people.
Thanks for your time,
Francesco.
Iam here to ask you for some technical advices on an issue im having on my new (and first) pc build.
Here are the specs:
MOBO: MSI B550 Gaming GEN3
CPU: Ryzen 5 5600
GPU: XFX Radeon RX 6600
Memory: Lexar thor 2x8GB DDR4 3200MHz
Storage: crucial ssd 1tb
PSU: MSI MAG A660BN
WIFI Module installed also
Iam encountering permanent red cpu light but fans are spinning and their rgb is on and i have no display at all.
I tried flashing the BIOS with the latest (and also tried some older) version from the MSI Mobo support site, renamed the p60 file into MSI.ROM etc. but nothing seems to happen after the 7-10 minutes the bios takes to upgrade.
I also tried updating it with no components mounted as many people wrote on forums but without at least the cpu mounted the mobo wont turn on, so i tried with only cpu mounted on it.
I even followed a guide on removing CMOS battery to reset bios then flashed it again but nothing, zero display.
With only cpu mounted it gave me a DRAM Red light debug (obv there were no rams!) then i installed a stick of ram and it came back to Red CPU light.
Strange thing is that if i have everything mounted on and i remove all rams the CPU Led stays ON and DRAM wont turn on instead.
I've ran out of debug tries, i tried literally everything i found online.
The thing that makes me crazy is i havent seen a single output display at all and i havent figured out where is the problem.
I'd be glad if you had some advice for me people.
Thanks for your time,
Francesco.