Welp here goes nothing.
Build a new pc. First pc build. All went well until i booted. d0 error and boot loop follows. Tried every possible fix i found online but no good. Put in my 8600k and voila boots up and all swell. Gigabyte site says need f7 bios to run 9900k had f8 installed. Changed to f7&f9 bit d0 error code keeps coming. Seeing as my 8600k works flawless the mobo can't be the problem. So could my fresh out the box cpu be faulty? Any other ideas please shate your thoughts.
System specs:
-Gigabyte Z390 Aorus Ultra
-I9 9900K
-2x8gb Dominator DDR4 3000mhz
-Gigabyte RTX 2080 TI Gaming OC
-Corsair RM850 80+ Gold
-1 Samsung Evo 960 500gb m.2
-2 SSD
-1 HDD
-Noctua NH-D15 Black Chroma
Build a new pc. First pc build. All went well until i booted. d0 error and boot loop follows. Tried every possible fix i found online but no good. Put in my 8600k and voila boots up and all swell. Gigabyte site says need f7 bios to run 9900k had f8 installed. Changed to f7&f9 bit d0 error code keeps coming. Seeing as my 8600k works flawless the mobo can't be the problem. So could my fresh out the box cpu be faulty? Any other ideas please shate your thoughts.
System specs:
-Gigabyte Z390 Aorus Ultra
-I9 9900K
-2x8gb Dominator DDR4 3000mhz
-Gigabyte RTX 2080 TI Gaming OC
-Corsair RM850 80+ Gold
-1 Samsung Evo 960 500gb m.2
-2 SSD
-1 HDD
-Noctua NH-D15 Black Chroma