Question BSOD Critical Process Died after overclocking gpu. PLEASE HELP

[goldenmango]

I was following an overclocking tutorial from userbenchmarks with afterburner and it seemed like everything was fine until I ran Userbenchmark and my PC went into a blackscreen and then bsod.
When I try to use a restore point or hard reset the pc all i get is an error. I can go into Bios without any problems though.

AMD 7700x
RX 7800 XT
Crucial P3 Plus 1tb
2x16 g skill f5 DDR5 RAM
750W gigabyte

 

[XxDarkMario20xX]

Try and do bios reset and see that works and also you could try connecting cable into motherboard to use CPU grapthics and reset your overclock on MSI or even try using DDU in safe mode to do clean GPU install again. Your GPU could not handle the overclock you have done and BSOD and sometimes its like a lottory and you have to be really careful when overclocking..

 

[goldenmango]

Try and do bios reset and see that works and also you could try connecting cable into motherboard to use CPU grapthics and reset your overclock on MSI or even try using DDU in safe mode to do clean GPU install again. Your GPU could not handle the overclock you have done and BSOD and sometimes its like a lottory and you have to be really careful when overclocking..

Can you explain how to do the DDU?

 

[XxDarkMario20xX]

Can you explain how to do the DDU?

Here is youtube vid also have you tried using bios reset making sure all settings are cleared also have you place cable into motherboard and use onboard grathics to remove MSI afterburner settings

View: https://www.youtube.com/watch?v=xn8z39tiEL0&ab_channel=Maraksot78