Question BSOD points to ntoskrnl.exe+3f3ea0.

saint7269

Distinguished
Jul 16, 2011
129
0
18,710
9
Hello all. I keep getting BSOD's that point to ntoskrnl.exe+3f3ea0. Not all the BSOD are the same but they all point to ntoskrnl.exe+3f3ea0. I've done all the scans, driver updates, BIOS updates ect. Any help would be appreciated.
 

PC Tailor

Judicious
Ambassador
Please see this guide for information to include on BSOD posts :)
 

PC Tailor

Judicious
Ambassador
I have run the dump file(s) and you can see the full report(s) in the link below.
If you are prompted to ""Run only if trusted"" simply click play/run and the html will be viewed. This warning is always present.

Report: https://jsfiddle.net/7o981e2p/show

Summary of findings:
MEMORY_MANAGEMENT
"Running the Windows Memory Diagnostic tool or memtest could be useful as well to exclude any kind of problem affecting the physical memory modules.

This can be driver or hardware based. If you are encountering other hardware issues, you may have to look at hardware diagnosis.

  • Confirm that hardware is compatible with your system.
  • View the third party modules of the report to view which drivers may be misbehaving."
 

Colif

Win 10 Master
Moderator
ntoskrnl is the victim, not the cause. Its the windows kernel, you sort of can't run windows without it.

might want to update GPU drivers, currently using some from 2019. Most of the drivers seem brand new.

as suggested by PC, Try running memtest86 on each of your ram sticks, one stick at a time, up to 4 passes. Only error count you want is 0, any higher could be cause of the BSOD. Remove/replace ram sticks with errors. Memtest is created as a bootable USB so that you don’t need windows to run it

really depends what other errors are. Ram errors tend to jump around, not just blame the same thing all the time.

windows sees hdd as memory as well as its where the page file is located
try running this on ssd and check SMART scores - https://support.wdc.com/downloads.aspx?p=279
Try running this in Samsung - https://www.samsung.com/semiconductor/minisite/ssd/product/consumer/magician/
Not sure about Toshiba tests.

IS ram on the Asus QLV listing for motherboard?
Do you have latest BIOS?
 

saint7269

Distinguished
Jul 16, 2011
129
0
18,710
9
Thank you both for the responses. My BIOS is up to date and my memory is on the QVL list. I've manuly set my Infinity fabric to 1800. Could that cause this problem?
 

PC Tailor

Judicious
Ambassador
I have run the dump file(s) and you can see the full report(s) in the link below.
If you are prompted to "Run only if trusted" simply click play/run and the html will be viewed. This warning is always present.

Report: https://jsfiddle.net/tdqwe57r/show

Summary of findings:
KMODE_EXCEPTION_NOT_HANDLED
"This can be driver or hardware based. If you are encountering other hardware issues, you may have to look at hardware diagnosis.

  • Confirm that hardware is compatible with your system.
  • View the third party modules of the report to view which drivers may be misbehaving."
Have you also run memtest?
 

saint7269

Distinguished
Jul 16, 2011
129
0
18,710
9
First off thank you all for the help. Let me run memtest and see what happens. I turned DOCP back on and add +.05 to the voltage to stabilize the memory. I'll run memtest with DOCP on and off.
 

Colif

Win 10 Master
Moderator
So your ram codes are F4-3600C16-8GVKC according to BIOS
If I look on https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/TUF_GAMING_X570-PLUS/Memory_QVL_for_3rd_Gen_AMD_Ryzen_Processors_X570_0722.pdf I can't see these sticks.

My 1st thought was you had matched 2x8gb sticks together as the 8gvkc would signify its an 8 gb package. All the ram tested on the Asus website are 16gb sets, or bigger

F4-3600 is its speed
C16 is its cas latency
8GVKC might be its packaging

now this is really close - https://www.gskill.com/product/165/184/1562831134/F4-3600C16D-16GVKC-Overview as it has same cas and voltage, and is on the Asus website (It is 2 x 8gb sticks, this is what makes me ask about what yours sell as)

If you have 2 individual sticks, that could be reason for errors. As just cause they exact same sticks. it doesn't mean they will play together unless sold together.

I can find the ram you have around but not on the G SKill website
https://www.memorybenchmark.net/ram.php?ram=G+Skill+Intl+F4-3600C16-8GVKC+8GB&id=13792
 
Last edited:

Colif

Win 10 Master
Moderator
Now I am not sure. These are details of the stick you have but they might be sold in the 16GVKC package? Google doesn't help as if I search for 8 it brings up results for 16. Acting like they are the same, and in a way they are, only difference is amount of sticks.

The 16 GVKC sets aren't 16gb sticks, they are 2x8gb. So since I know you don't have 4gb sticks , the 8 has to mean its a single stick.. and the info below shows it is. So unless the package is marked as 16GVKC yet the individual sticks are marked as 8GVKC, your sticks weren't tested by Asus. That doesn't mean they won't work, but if they are individual sticks, they may not work together.

MEMORY MODULE

Manufacturer G.Skill

Series Ripjaws V Black

Part Number F4-3600C16-8GVKC

Serial Number xxxxxxxxxxx

JEDEC DIMM Label 8GB 1Rx8 PC4-2133-UA1-11

Architecture DDR4 SDRAM UDIMM

Speed Grade DDR4-2133

Capacity 8 GB (8 components)

Organization 1024M x64 (1 rank)

Register Manufacturer N/A

Register Model N/A

Manufacturing Date Undefined

Manufacturing Location Taipei, Taiwan

DRAM COMPONENTS

Revision / Raw Card 0000h / A1 (10 layers)

Manufacturer Hynix

Part Number H5AN8G8NMFR-TFC

Package Standard Monolithic 78-ball FBGA

Die Density / Count 8 Gb M-die (Polaris / 25 nm) / 1 die

Composition 1024Mb x8 (64Mb x8 x 16 banks)

Clock Frequency 1067 MHz (0.938 ns)

Minimum Timing Delays 15-15-15-36-50

Read Latencies Supported 16T, 15T, 14T, 13T, 12T, 11T, 10T

Supply Voltage 1.20 V

XMP Certified 1802 MHz / 16-19-19-39-58 / 1.35 V

XMP Extreme Not programmed

SPD Revision 1.1 / September 2015
 

ASK THE COMMUNITY

TRENDING THREADS