Question Bulid compatibility

Feb 4, 2025
2
0
10
Hi everyone,

I’m planning a new PC build (3rd one) and would really appreciate your help. I’d like to know if the components I’ve chosen are fully compatible and whether my setup makes sense for good performance. If you have any suggestions for big improvements in the same price range, I’m open to hearing them but if the performance difference will be small most likely i won't use them because im really excited about looks of parts i've chosen. Budget isn’t my biggest concern, though I’d like to stay reasonable — I’m not looking for cheaper alternatives if eveything works fine. Once I complete the build, I plan to set my RAM to 6000 MHz CL30 because I've heard it’s the sweetpoint for Ryzen CPU's (1st and 2nd bulid were Intel). I think 6400MHz CL32 can also be compatible but it depends on something like silicon lottery right? And i will be most likely able top get 5070ti the day it releases because in my country 5080s were on stock for 3 days. Case I'll be using is NZXT H7 Elite (2022). And i already bought the ram so not possible to buy the lower MHz and CL version, I can just lower it in bios. I live in Poland, my budget is something around 1500$ without the gpu

Thanks in advance for your advice!

https://pcpartpicker.com/list/dMBn8Q

Sorry if it’s a wrong forum but i couldn’t decide, and as i’m saying if it’s fine i not looking for alternatives
 
Last edited:
Welcome to the forums, newcomer!

You're advised to stylize your thread with info asked of in this thread;
and the community can chime in with worthwhile suggestions.

Budget isn’t my biggest concern, though I’d like to stay reasonable
We will need a number, otherwise the skies our limit. The term budget is also a relative term, it's meaning will vary as you ask around.

I would look into a Corsair PSU or something that's a better quality, that's reliably built. The ram you've picked out is good for the build, has AMD's E.X.P.O on it. You can get DDR5-6400MHz since you're on the 9000 series Ryzen processor.

it releases because in my country 5080s were on stock for 3 days.
Where would this country be located on the Atlas? This is why we ask users to stylize their threads as the thread linked above, so users can understand what you have access to. Brand and product availability can and will vary with regards to region. If we're going to recommend something that isn't available in your country, then we're burning resources with back and forth. Passing on links to give us an insight of what you have access to, helps us two fold.

Moved thread from Components section to System section.
 
Welcome to the forums, newcomer!

You're advised to stylize your thread with info asked of in this thread;
and the community can chime in with worthwhile suggestions.

Budget isn’t my biggest concern, though I’d like to stay reasonable
We will need a number, otherwise the skies our limit. The term budget is also a relative term, it's meaning will vary as you ask around.

I would look into a Corsair PSU or something that's a better quality, that's reliably built. The ram you've picked out is good for the build, has AMD's E.X.P.O on it. You can get DDR5-6400MHz since you're on the 9000 series Ryzen processor.

it releases because in my country 5080s were on stock for 3 days.
Where would this country be located on the Atlas? This is why we ask users to stylize their threads as the thread linked above, so users can understand what you have access to. Brand and product availability can and will vary with regards to region. If we're going to recommend something that isn't available in your country, then we're burning resources with back and forth. Passing on links to give us an insight of what you have access to, helps us two fold.

Moved thread from Components section to System section.
Thanks for all the advices and moving thread to right section! Ten minutes in and i can already see the moderation is amazing, i’ll edit the thread a bit now. Do you know any good corsair PSU for this model? And it should be ATX 3.1 because of its support to new and 12v 2x6pin right? Is rest of the bulid fine? I know it might be a bit overpriced