I have a digital camera that works only on a SD cards. Its the Kodak Stylus 360. Just a few days ago I removed a full SD card and was trying to insert a larger size SD card. The first one was 16gb and the new one, 32gb. When I attempted to insert the 32 card, I met resistance about a 1/4 th of the way. After a few attempts with failures, I wanted to see if maybe there was a flaw with that new one, so I decided to try inserting the old one, which i just withdrew. That too had met resistance at the same space. I did not drop this camera, and it was working perfectly until I decided to insert the larger size one. Any ideas why the slot is resisting it? There is only one way to install SD card to my knowledge.