- Aug 12, 2024
- 2
- 0
- 10
Hi Guys ,
I am surprise to see no one in the whole internet have try this, I bought below system and recently I lost my power supply and mother board to a electric spike or something I have below specs as for now. So No way I am going to buy again another power supply. My problem is the sound blaster is working just fine, but the External Device that allow an XLR microphone to be connected to sound card ( Dynamic Microphone SM58 Shure) is not power up. Clearly on the Sound blaster Manual states this add-on requires 12v PCIe 6 pin connector. BUT my power supply does not have ANY of those... well it had 2x but they used on my Video card.
Now I do have 1 molex cable free, technically 2x molex free if I disconnect my Mechanic HD which I could dispose if Need it.
I bought from ebay a 1 to 1 Molex Male to 6 pin PCIe Female I can attach to the soundblaster they fit, but I am worried I can burn something.
I also bought the Y 2x Molex Male to 6 pin PCIe it says it power MORE Juice since uses 2 molex inputs to feed 1 PCIe
Which one should I try, single 1 to 1 or the Y one? Any risk? any advise, please help!??!
I am surprise to see no one in the whole internet have try this, I bought below system and recently I lost my power supply and mother board to a electric spike or something I have below specs as for now. So No way I am going to buy again another power supply. My problem is the sound blaster is working just fine, but the External Device that allow an XLR microphone to be connected to sound card ( Dynamic Microphone SM58 Shure) is not power up. Clearly on the Sound blaster Manual states this add-on requires 12v PCIe 6 pin connector. BUT my power supply does not have ANY of those... well it had 2x but they used on my Video card.
Now I do have 1 molex cable free, technically 2x molex free if I disconnect my Mechanic HD which I could dispose if Need it.
I bought from ebay a 1 to 1 Molex Male to 6 pin PCIe Female I can attach to the soundblaster they fit, but I am worried I can burn something.
I also bought the Y 2x Molex Male to 6 pin PCIe it says it power MORE Juice since uses 2 molex inputs to feed 1 PCIe
Which one should I try, single 1 to 1 or the Y one? Any risk? any advise, please help!??!
| Procesador Intel Core i5 8500 Coffe Lake-S 65W |
| ASUS TUF B365M-PLUS GAMING |
| 2x Corsair 8GB DDR4-2666 / PC4-21300 DDR4 SDRAM UDIMM 1333 MHZ |
| Zotac GTX 1070 Ti AMP NVIDIA GeForce GTX 1070 Ti |
| SATA 6GB/s Kingston SA400S3790G (960GB) |
| SATA 6GB/s HGS HTS271075A9E630 (750GB) |
| NVMe x4 8.0 GT/s Samsung SSD 980 ( 1tb ) |
| NVMe x4 8.0 GT/s Samsung SSD 970 EVO (500GB) |
| BeQuiet Dark Rock 3 |
| Sound Blaster Card AE-9 |
| Power supply Aerocool Cylon 700W RGB 80 Plus Bronze |
| Microsoft Windows 11 Professional (x64) Build 22631.3880 (23H2) |
| Speakers Logitech Z625 |
| Monitor MSI Optix MAG27CQ - 27" - 2K |
| In Win - Kit de Fans Aurora RGB - |
| Case In Win 303 Blanco |
Facebook
Twitter
Instagram