I recently "upgraded" from a 10700k to a 11700k because i wanted to utilize the gen4 capability of my motherboard.
before i upgraded i cleared my cmos then booted into windows no problem before i remembered o yea 2133 thing so back to bios to enable XMP.
BAM boot error XMP wont work at all.
I updated my bios.
I reseated my CPU.
I tried changing many settings like increasing latencies to try make higher frequencies stick tried higher frequencies with the standard latencies tried it all with and without a voltage increase.
Was able to make some settings stick like under-clocking to 1600mhz!
As well as gear 1 gear 2( both only with 2133mhz) voltage settings stick but if i try to couple them with mhz it just fails to boot...
Am i missing something obvious like my last brain cell or?
i saw someone asking for specs for someone else so i updated this next part.
CPU cooler: Corsair iCUE H115i 240mm AIO
SSD/HDD: Seagate Firecuda 530 m.2 gen4 nvme 500gb
GPU:RTX3070 Ti Aorus
PSU:Gigabyte P1000GM 1000W 80+ Gold
OS: Win10 Pro
RAM:https://www.pbtech.co.nz/product/ME...-F4-3200C16D-16GTRS-16GB#product-specs-anchor
x4 sticks
Mobo:Gigabyte z590 Aorus Elite rev 1.0 runing the latest version bios.
CPU:11700k
XMP of 3200 15/16/16/42 with 1.4V ran fine on 10700k with same mobo.
Got some settings i can try?
before i upgraded i cleared my cmos then booted into windows no problem before i remembered o yea 2133 thing so back to bios to enable XMP.
BAM boot error XMP wont work at all.
I updated my bios.
I reseated my CPU.
I tried changing many settings like increasing latencies to try make higher frequencies stick tried higher frequencies with the standard latencies tried it all with and without a voltage increase.
Was able to make some settings stick like under-clocking to 1600mhz!
As well as gear 1 gear 2( both only with 2133mhz) voltage settings stick but if i try to couple them with mhz it just fails to boot...
Am i missing something obvious like my last brain cell or?
i saw someone asking for specs for someone else so i updated this next part.
CPU cooler: Corsair iCUE H115i 240mm AIO
SSD/HDD: Seagate Firecuda 530 m.2 gen4 nvme 500gb
GPU:RTX3070 Ti Aorus
PSU:Gigabyte P1000GM 1000W 80+ Gold
ChassiseepCool Matrexx55 Mesh |
RAM:https://www.pbtech.co.nz/product/ME...-F4-3200C16D-16GTRS-16GB#product-specs-anchor
x4 sticks
Mobo:Gigabyte z590 Aorus Elite rev 1.0 runing the latest version bios.
CPU:11700k
XMP of 3200 15/16/16/42 with 1.4V ran fine on 10700k with same mobo.
Got some settings i can try?
Last edited: