Question Case dilemma

[Harhar93]

So, I bought a kolink satellite case, now my motherboard is just a little to big to fit in with the psu on place, so I decided to cut the grill off the front, so I could push the psu a bit further on, now I have a problem, the fan will be facing towards the case wires, which I am afriad to do as it might suck the wires into the psu, question is could I have the psu fan facing towards the motherboard, the fan would be about 3 inch away from the ram.

 

[Ralston18]

You should not have needed to cut anything.

Did you purchase the case online or from a store? Verify the case's measurements versus the specs.

Consider that the case you received was incorrect, counterfeit, or defective in some manner.

Post the case model and any related links that you used.

Also post some photographs - here is how to do that:

http://www.tomshardware.com/answers/id-2173703/post-images-tomshardware-guide.html

 

[Harhar93]

My motherboard was a few cm to big, and collided with the psu, it was my own fault for assuming it would just fit any micro atx mobo without checking measurements.