[SOLVED] Case front RGB light is not working? (SOLVED)

[ismmostaar1]

[Moderator note: Changing to Solved per Post #5.]

- MOBO; Asrock B450M-HDV R4.0
- Case: AeroCool Streak

I have moved my components from an HP case to a new one, everything is working fine including the power button and the 2.0 & 3.0 USB ports and HD audio, except the RGB light lines on the front of the case, i don't have any RGB fans but i would like to turn on the case lights if possible it has two straight ARGB lines, i press the reset button that allegedly change the colors according to advertizing videos but nothing happens,

here's a shot of the case user manual if could you show me which cable is responsible for tuning the case lights on? is there any solutions please, or is it that my motherboard just not supported? thanks.

 

[JohnBonhamsGhost]

this front I/O cable diagram appears to be showing you;

the system reset and system power buttons,
the HD usage light and system power light.

then
front panel power input,
front audio ports connection,
front USB ports connection.

should have nothing to do with the case LEDs.

 

[JohnBonhamsGhost]

everything is working fine...except the RGB light lines on the front of the case

does this case have plain RGB, aRGB, or static color LEDs built-in?

 

[ismmostaar1]

does this case have plain RGB, aRGB, or static color LEDs built-in?

Adjustable RGB

 

[ismmostaar1]

UPDATE:
I have solved the problem, turned out there is a cable that was supposed to be connected to the PSU via a SATA cable which i didn't plug, i saw that cable at first and ignored it because i would never guess that pc cases uses SATA cables, so obviously just a newbie mistake, sorry and thanks.

 

[JohnBonhamsGhost]

Adjustable RGB

you should also be able to connect the case LEDs to a motherboard aRGB header to allow syncing lights with other onboard devices rather than relying on a button to control them.

 

[ismmostaar1]

you should also be able to connect the case LEDs to a motherboard aRGB header to allow syncing lights with other onboard devices rather than relying on a button to control them.

My motherboard does not support RGB and i don't have RGB fans, actually i don't like RGB except for this front panel thing, even though it's ARGB i like to adjust it to static white