Just going to Add some testing i did. They did state there was some X1xxx card improvements too....I don't see much tho
System
Q6600 @ 3.0
3 Gigs of DDR @ 667 4,4,4,10
P35-DS3R
2 x 500gig drives
2 x 320gig drives
2 x 250gig drives(raid 0)
Creative Audigy 2zs
Samsung DVD burner
ATI X1900XT 512mb
3DMarks 2005
12204 - 7.9
12157 - 7.10
3DMarks 2006
6638 - 7.9
6615 - 7.10
HL2 Based
1280 x 1024
Lost Coast
93.42 - 7.9 (this was +/- 2 - 4 fps run to run)
93.80 - 7.10
CS Source
175.14 - 7.9
171.42 - 7.10
ET QW Demo(1280x1024 max without shadows[my preference] + frame rate lock off[i think it locks to 120])
min, max, avg
62, 119, 77.154 - 7.9
57, 120, 77.133 - 7.10
This was hard as the demos seem to be capped at 30fps....so i had to play a bit....I only care about average in this case as the max and min could play from anything(explosions, effects from transparent forcefields ect)....
They did say there was a improvement for 7.10(for the X1xxx cards) on ETQW but i don't see it....
At least for the last generation....there is nothing new here....