Cel D 2.53GHz@4.57GHz aircooled BOX, unstable.

[misokgb]

Hi, my overcloc: Celeron D 2530MHz@4570MHz BOX aircooled, unstable under windows with clockgen. Using: Asus P4C800 DLX, 2x256MB OCZ DDR400MHz EL, Fortron 350W 120mm. Voltage: 1.65V 😀

CPU-Z validate report :twisted:

 

[mdd1963]

Is there a question here, or are you seeking some sort of recognition that a heavily OC'd Celeron can even POST at that freq?

Or are you looking for a solution to the instabilty? 🙂

 

[illicitsc]

ok buddy, unstable ocs are garbage and completely useless, tell us when u find its stable speed and giv us some benchies

 

[apache_lives]

holy crap 1.65v on a celeron d prescott? thats as much as my P4 northwood runs at!!!!!!!!!!!! that things gotta be running hot! screw benchmarks post some temps!!!!!

PSU is too little perhaps for that overclock

most cpus can post at extreme speeds but only a few can hold it at extreme speeds.

ditch the stock cooler if you havnt already done so aswell and is pci/agp locked?

 

[chuckshissle]

and on an air cooled. Are you sure the CPU is not red hot!!!!

 

[rodney_ws]

I'll admit it. I'm impressed.

 

[cedric]

Cool that cpu or else u will lose what u have . i salute ur attempt 8O 8)

 

[WINDSHEAR]

I believe he could stabilize it, he should do a once over of everything, starting with the PSU, then to the memory, etc (a very common culprit, also affecting my OC). And getting some serious cooling in there probably wouldn't hurt either 😛 it just might stabilize it.

 

[cloud9]

for stability i would recomend dropping u clock a little

or maybe u need a new cooler also watch ur voltage make sure ur ram isnt being ocd too this might afect stability and i presume u have agp or pci lock

 

[mayouuu]

you can make it more stable going near 6ghz, try to...... :idea:

 

[apache_lives]

you can make it more stable going near 6ghz, try to...... :idea:

WTF

 

[kyleawesome]

you can make it more stable going near 6ghz, try to...... :idea:

I thought that was hilarious

 

[V2V3]

LOL no way...
get some better ram and a new PSU with a little more kick.....
and go for a nice little Watercooling setup.
Enermax 6000W PSU???
corsair XMS DDR2 8000C1.5Pt
and grab a 800w CPU block and 800w Chipset block from koolance
than you could probly hit a stable 5.995Ghz

 

[illicitsc]

celeron ocing is kinda cheap..as in unfair.

1st. FSB is 133, so motherboards will never be a factor since p4s go to 200 on stock

2nd. DDR2, dram is set at 1:1 so ram is not a factor.

3rd. all you have to do is crank up the fsb and up the voltage.

sigh, im not bashign u or anything, just saying that celes are unfair cuz even sempys run at 200fsb

 

[joefriday]

celeron ocing is kinda cheap..as in unfair.

1st. FSB is 133, so motherboards will never be a factor since p4s go to 200 on stock

2nd. DDR2, dram is set at 1:1 so ram is not a factor.

3rd. all you have to do is crank up the fsb and up the voltage.

sigh, im not bashign u or anything, just saying that celes are unfair cuz even sempys run at 200fsb

Sounds like whining to me........

This is why Celerons are king bang for the buck for audio/video encoding. I bet it is stable at 4 ghz at 1.5 volts. You wouldn't even need a board w/agp/pci locks for that speed either. Congrats!!! 😀

 

[hashv2f16]

LOL no way...
get some better ram and a new PSU with a little more kick.....
and go for a nice little Watercooling setup.
Enermax 6000W PSU???
corsair XMS DDR2 8000C1.5Pt
and grab a 800w CPU block and 800w Chipset block from koolance
than you could probly hit a stable 5.995Ghz

Screw watercooling, use LN2!

I like this guys balls.

 

[apache_lives]

nah better still take it to pluto and run it at some insane negitive temp

 

[hashv2f16]

No more condensation!

You'd need a really powerful heater for your hard drive though because those things aren't rated to work under 5*C

 

[apache_lives]

GIVES FREEZE A WHOLE NEW MEANING WHEN YOUR COMPUTER STOPS

 

[denster]

Seems strange that this poster has an ICON already at 1 POST????? And the fact that he is not even replying.... I wonder if it is that one guy again, or maybe his buddy

 

[denster]

Perhaps his "BOX" has exploded :?:

 

[ak47is1337]

Think you're hot sh1t? Check this out. New Cedar Mill 356 @5.0ghz stable.
http://hkepc.com/hwdb/celeron512k-2.htm
Stock cooler, I might add -.-

 

[apache_lives]

and to think all this overclocking offort is in vain - a conroe smacks us all

 

[Heyyou27]

A friend of mine has his 955EE at 4.9GHz and his BUS speed is somewhere around 1.5GHz.

 

[ak47is1337]

A friend of mine has his 955EE at 4.9GHz and his BUS speed is somewhere around 1.5GHz.

VRzone.com has some test where it runs 5.3 on dry ice.