Changing Memory Timing Causes Windows XP Bluescreen

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I have the Asus P4P800 motherboard and Corsair Twinx1024-3200C2. This
memory has a supported timing of 2-3-3-6. If I have the SPD Auto set to
enabled, the system post and Windows XP starts up without any issues.

If I disable SPD and set the memory timing to 2-3-3-6, the system post
correctly; however, Windows XP gives me the bluescreen of death.

The system is not overclocked and Windows XP was installed with SPD enabled.

This doesn't seem like an issue with the hardware, just windows
quarkiness. Has anyone else seen this or found a solution?

~Randy

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Randy Snyder wrote:
> I have the Asus P4P800 motherboard and Corsair Twinx1024-3200C2. This
> memory has a supported timing of 2-3-3-6. If I have the SPD Auto set to
> enabled, the system post and Windows XP starts up without any issues.
>
> If I disable SPD and set the memory timing to 2-3-3-6, the system post
> correctly; however, Windows XP gives me the bluescreen of death.

That's weird. With it set to Auto, what does Aida32 or any other suitable
program report the timings as?

What is VDimm?

> The system is not overclocked and Windows XP was installed with SPD
> enabled.
>
> This doesn't seem like an issue with the hardware, just windows
> quarkiness. Has anyone else seen this or found a solution?

It sounds exactly like a hardware issue, and not at all like Windows
quirkiness.

Ben
--
A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html
Questions by email will likely be ignored, please use the newsgroups.
I'm not just a number. To many, I'm known as a String...

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Ben Pope wrote:
> Randy Snyder wrote:
>
>>I have the Asus P4P800 motherboard and Corsair Twinx1024-3200C2. This
>>memory has a supported timing of 2-3-3-6. If I have the SPD Auto set to
>>enabled, the system post and Windows XP starts up without any issues.
>>
>>If I disable SPD and set the memory timing to 2-3-3-6, the system post
>>correctly; however, Windows XP gives me the bluescreen of death.
>
>
> That's weird. With it set to Auto, what does Aida32 or any other suitable
> program report the timings as?
>
> What is VDimm?
>
>
>>The system is not overclocked and Windows XP was installed with SPD
>>enabled.
>>
>>This doesn't seem like an issue with the hardware, just windows
>>quarkiness. Has anyone else seen this or found a solution?
>
>
> It sounds exactly like a hardware issue, and not at all like Windows
> quirkiness.
>
> Ben
OK, I reset the BIOS defaults and had the same issue. I flashed the BIOS
to the newest version, which was only a month older than the one I had
installed. This corrected the problem.

Randy

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Hi,

I've read somewhere that Corsair was aware of that SPD issue.

They just advise to switch to manual and adjust the expected values. New sticks will be corrected but no aftersales exchange just
for that.

Mike




"Randy Snyder" <aggie07@austin.rr.com> a écrit dans le message de news: cyvgc.16107$Hf7.9074@fe2.texas.rr.com...
> I have the Asus P4P800 motherboard and Corsair Twinx1024-3200C2. This
> memory has a supported timing of 2-3-3-6. If I have the SPD Auto set to
> enabled, the system post and Windows XP starts up without any issues.
>
> If I disable SPD and set the memory timing to 2-3-3-6, the system post
> correctly; however, Windows XP gives me the bluescreen of death.
>
> The system is not overclocked and Windows XP was installed with SPD enabled.
>
> This doesn't seem like an issue with the hardware, just windows
> quarkiness. Has anyone else seen this or found a solution?
>
> ~Randy