Computer component issues

[Zekarul]

I have bought a Thermaltake Esports Challenger keyboard and had, had this for a few months. Only recently when I switched to a new motherboard, new processor, same hardrive, has this started happening. The keyboard will receive power, meaning the fan works and the backlight is on, but the computer no longer recognizes it. This also happens with my Logitech c110 webcam. Is there an answer for this?
Specs:
MSI Z87-GD65 Gaming LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Extreme OC High Performance Triple CFX/ SLI Intel Motherboard
Intel Core i7-4770 Haswell 3.4GHz LGA 1150 84W Desktop Processor Intel HD Graphics BX80646I74770
Rosewill THRONE Gaming ATX Full Tower Computer Case, support up to E-ATX/XL-ATX, come with Five Fans-2x Front Red LED 140mm Fan, 2x Top 140mm Fan, 1x Side 230mm Fan, 1x Rear 140mm Fan

 

[bgunner]

make sure you have installed all the drivers installed for the equipment, for the usb ports, make sure the keyboard and cam are plugged into usb 2.0 ports and not the usb 3 ports.

 

[zeph_yr]

Make sure your CPU power is plugged in. If that doesn't solve the problem, reseat the CPU and check for bent pins. What heatsink are you using?

 

[bgunner]

@ zeph_yr
how does the CPU make just the keyboard and webcam drivers not work or the usb ports not work? it doesn't its a driver or motherboard or OS issue. most likely a driver or USB 3 port issue.

 

[zeph_yr]

Tom's needs a way to remove posts... Completely misread the OP.

 

[Zekarul]

It didnt fix it well enough. Restart my computer just makes the problem go away for a small amount of time which often varies.

 

[Zekarul]

Nevermind?...I dont know what just happened. But apparently I should've kept the keyboard in the usb 2.0? Because it just installed itself onto the computer in the 2.0 port.
Why wouldn't it work for the 3.0?
Cooler Master V8 GTS - High Performance CPU Cooler with Horizontal Vapor Chamber and 8 Heatpipes That is the heatsink I'm using.

 

[bgunner]

I'm not sure why some keyboards have issues in the USB 3 ports but it seem to happen often. I personally don't have that issue with my setup but have seen it many time here in these forums.

 

[Zekarul]

Alright. That's weird. It doesn't seem to disturb the performance at all. And I haven't had an issue yet. So! Thank you, also. I plugged the camera into the 3.0 port and it installed a driver for itself as well.