[SOLVED] Computer crashes at stock memory speed

[Kupica]

So i bought 2x8GB 2400Mhz memory for my computer and when i boot my computer it crashes after a few minutes. Sometimes it doesnt even get past the motherboard logo screen. It crashes in the BIOS as well.
But if i lower the speed below the stock 2400Mhz it works fine without any crash, and if i OC my ram above 2400Mhz it wont crash either. Both works fine in single channel, the problem only occurs when in dual channel at 2400Mhz.
I tried Memtest and shows 0 error. My temperatures are around 35°C.
my PC:
Mobo: Asrock A320M-DGS
CPU: Ryzen 5 1600x
CPU: Nvidia GTX 1060 6gb
Memory: 2x Kingston 8gb PC4-2400 CL17

 

[scout_03]

the board says it work at 2667 with cpu for ram so it might that this ram at stock speed have a issue did you check for compatibility with the board .

 

[RodroX]

Did you check the QVL list (https://www.asrock.com/MB/AMD/A320M-DGS/#Memory) before buying the memory to see if it was supported ?

 

[Zerk2012]

So i bought 2x8GB 2400Mhz memory for my computer and when i boot my computer it crashes after a few minutes. Sometimes it doesnt even get past the motherboard logo screen. It crashes in the BIOS as well.
But if i lower the speed below the stock 2400Mhz it works fine without any crash, and if i OC my ram above 2400Mhz it wont crash either. Both works fine in single channel, the problem only occurs when in dual channel at 2400Mhz.
I tried Memtest and shows 0 error. My temperatures are around 35°C.
my PC:
Mobo: Asrock A320M-DGS
CPU: Ryzen 5 1600x
CPU: Nvidia GTX 1060 6gb
Memory: 2x Kingston 8gb PC4-2400 CL17

Did you you'd buy the memory in a matched set as 1 package or 2 individual sticks?

Increase the voltage to 1.25

 

[Kupica]

Did you you'd buy the memory in a matched set as 1 package or 2 individual sticks?

Increase the voltage to 1.25

I bought 2 invidual sticks.I bought 1 stick a year ago and a new stick today. After running more memtests it turns out that the new memory is faulty