Hi everyone, I recently decided to build myself a computer, and I, being a noob, probably did something wrong.
I went and bought myself a OCZ 700W Modular PSU and a HAF922 case to house all the parts that were in my HP P6334f (specs below and mobo diagram within)
http://h10025.www1.hp.com/ewfrf/wc/product?product=4120601&lc=en&cc=uk&dlc=en&lang=en&cc=uk
So, I put everything in properly (to the best of my knowlege), mounted the PSU, mobo, hard drive, cd drive, etc. Plugged in the 24 pin power connector to the PSU and the 4 pin to the CPU spot to the left of the CPU, plugged the SATA cables as follows: SATA port 1 - Hard Drive, SATA port 2 - CD Drive, SATA port 3 - Case SATA Cord (probably for LED on/off or something, im not sure) and the power for the hard drive and CD Drive are on one single cable running to the PSU.
(Referr to screenshots if this makes no sense, im sorry if it doesn't but im new at computers and this is how im understanding it lol)
Now, I plug in the Powercord to the PSU from the wall, and flip the switch, but I get no fan's coming to life, sound, or lights. So, I looked online for what each port on the motherboard according to the HP support website has and found the one on the bottom right corner is where the tiny cords from the case plug into to power the unit up. I found a guide online after typing the port name in to plug the tiny cords in, but still I have no power. So, I took the old power button from the HP case and plugged it into the same spot as it was plugged into from before (which turns out to be the botton right corner spot) and tried using it but got no lights and nothing would happen when I pressed it.
Im asking you, the smart people of this community, to attempt to understand my problem and solve it before I end up paying to get it looked at, to find out its 1 stupid cord I have wrong.
EDIT: I realise I don't have the GPU plugged into the PCI slot, Im using it in this current PC so I can post these questions. When I try your reccomendations I will take it out and move it over to the other PC.
Here is a link to the pictures (It's a Mediafire link, the pictures are in a .rar file, ImageShack does not like it when I upload to the internet so I apologize)
Link: http://www.mediafire.com/?vvez2d5cg87ygmc
Please take a look at the pictures, try to see through the mess of wires, and see what I've done wrong so I can solve this myself. I really need your help guys & gals!
I went and bought myself a OCZ 700W Modular PSU and a HAF922 case to house all the parts that were in my HP P6334f (specs below and mobo diagram within)
http://h10025.www1.hp.com/ewfrf/wc/product?product=4120601&lc=en&cc=uk&dlc=en&lang=en&cc=uk
So, I put everything in properly (to the best of my knowlege), mounted the PSU, mobo, hard drive, cd drive, etc. Plugged in the 24 pin power connector to the PSU and the 4 pin to the CPU spot to the left of the CPU, plugged the SATA cables as follows: SATA port 1 - Hard Drive, SATA port 2 - CD Drive, SATA port 3 - Case SATA Cord (probably for LED on/off or something, im not sure) and the power for the hard drive and CD Drive are on one single cable running to the PSU.
(Referr to screenshots if this makes no sense, im sorry if it doesn't but im new at computers and this is how im understanding it lol)
Now, I plug in the Powercord to the PSU from the wall, and flip the switch, but I get no fan's coming to life, sound, or lights. So, I looked online for what each port on the motherboard according to the HP support website has and found the one on the bottom right corner is where the tiny cords from the case plug into to power the unit up. I found a guide online after typing the port name in to plug the tiny cords in, but still I have no power. So, I took the old power button from the HP case and plugged it into the same spot as it was plugged into from before (which turns out to be the botton right corner spot) and tried using it but got no lights and nothing would happen when I pressed it.
Im asking you, the smart people of this community, to attempt to understand my problem and solve it before I end up paying to get it looked at, to find out its 1 stupid cord I have wrong.
EDIT: I realise I don't have the GPU plugged into the PCI slot, Im using it in this current PC so I can post these questions. When I try your reccomendations I will take it out and move it over to the other PC.
Here is a link to the pictures (It's a Mediafire link, the pictures are in a .rar file, ImageShack does not like it when I upload to the internet so I apologize)
Link: http://www.mediafire.com/?vvez2d5cg87ygmc
Please take a look at the pictures, try to see through the mess of wires, and see what I've done wrong so I can solve this myself. I really need your help guys & gals!