Question Configure logging to 2 routers on same network from one PC ?

[TalkingTomCat]

Hello,
I had an old router and had difficulty with local lan transfers on my PC.. its different issue in this topic:
Recently bought a NEW Router and connect same to Internet using PPPOE.
Check my Network Diagram..

https://imgur.com/a/md4GzS7

View: https://imgur.com/a/md4GzS7


Everything is working as required, But cannot access both router configuration at one time from my Windows 10 PC.

NEW ROUTER = A
IP range = 192.168.0.1
SSID 2.4ghz = TEST2.4 (Works Perfect)
SSID 5ghz = TEST5 (Works Perfect)

Wireless Settings on NEW router:

https://imgur.com/a/uOdwJHg

View: https://imgur.com/a/uOdwJHg


Network/Lan Interface on NEW Router:

https://imgur.com/a/Mi7Zu2J

View: https://imgur.com/a/Mi7Zu2J


OLD ROUTER = B
Using latest openwrt Firmware
IP range = 192.168.1.1
SSID 2.4ghz = 2.4 OLD ROUTER (Works Perfect)
SSID 5ghz = 5 OLD ROUTER (Works Perfect)

Wireless Settings on OLD router:

https://imgur.com/a/mhavjQx

View: https://imgur.com/a/mhavjQx


Network/Lan Interface on OLD Router:

https://imgur.com/a/rIsoRML

View: https://imgur.com/a/rIsoRML


To connect to OLD router when everything is running fine to make some changes:
(have to turn off NEW router do a network adapter RESET, then OLD router works fine, but internet does not works as IP range gets changed/updated from OLD Router and cannot access NEW router interface)

To connect back to NEW router:
(have to turn off OLD router do a network adapter RESET, then NEW router works fine, Everything starts working perfectly, but cannot access OLD router Interface)

Old Router SSID Settings in 2.4ghz and 5ghz mode:

https://imgur.com/a/5dxg2H1

View: https://imgur.com/a/5dxg2H1


Can someone direct to a proper solution please ?
I am not sure how to configure openwrt settings, was done by someone else.

Thanks.

 

[Ralston18]

Bottom line:

If it is to be a single network there should only be one router.

This:

"I am not sure how to configure openwrt settings, was done by someone else."

Contact that "someone" to find out what they did.

And please explain why you feel it is necessary to redact MAC addresses.

Or why you decided to open another thread.

It may or may not be a "different issue". In any case, go back and update your original post as applicable with this new information.

This thread is being closed.