Okay to I got everything I need to wire up the whole house with ethernet cable. but I can't seem to get the wiring right. This is the picture I used for the wall jack.
http://www.handymanhowto.com/wp-content/uploads/2009/01/DSC00431-450x199.jpg
This is the picture I used for the connector.
http://www.practicallynetworked.com/img/568b.jpg
I have a keystone on one end of the cable and a connector on the other end at the switch and router. But when I use my tester (I used a patch cable that I know works to bridge the keystone side) The lights don't match up on both ends. Any help on which end I got wrong or the whole thing?
ALSO I don't have a patch panel and even if I did I don't have enough keystones. It needs to be
Wall keystone >>>>>>> Connector
Any help?
http://www.handymanhowto.com/wp-content/uploads/2009/01/DSC00431-450x199.jpg
This is the picture I used for the connector.
http://www.practicallynetworked.com/img/568b.jpg
I have a keystone on one end of the cable and a connector on the other end at the switch and router. But when I use my tester (I used a patch cable that I know works to bridge the keystone side) The lights don't match up on both ends. Any help on which end I got wrong or the whole thing?
ALSO I don't have a patch panel and even if I did I don't have enough keystones. It needs to be
Wall keystone >>>>>>> Connector
Any help?