Connecting VFD/IR display on Silverstone LC16M

[JamesStopford]

Hi,

I’m having problems connecting the power supply to the display of the Silverstone LC16M case. There is a 4 pin male connector coming from the display. I believe that there should be an adapter from the 24pin ATX power cable, however this is missing. I was hoping you would be able to tell me which wire from the display should be connected to which wire of the 24pin ATX cable. I have included a picture highlighting the wires in question.

Many thanks,

James

[/img]

 

[mcnumpty23]

yes i think you are missing the adaptor

this may help

http://www.avforums.com/forums/computer-systems/665803-silverstone-lc16m-vfd-connection-help.html

 

[JamesStopford]

Thank you, that was very useful, however my case has four wires instead of three. So according to my understanding this is how three wires should be connected up . . .

Orange - Purple (pin 9)

Red - Red (pin 6)

Black - Black (pin 7)

According to the pin layout on Wikipedia,

http://en.wikipedia.org/wiki/ATX


Am I correct with this?

Also which pin should the brown wire be connected to?


Any help would be much appreciated,

James

 

[JamesStopford]

I was wondering if anyone one owned a Silverstone LC16M with the four pin connection for the VFD/IR display, that wouldn't mind having a look at there adapter to see which wire from the display is connected to which pin of their ATX cable.

Many thanks,

James