Hi,
I've recently installed 4GB of Corsair C4DHX (2x2GB) RAM onto my Gigabyte EP45-DS4P motherboard (only RAM installed).
However, the system will only run stable if I underclock the RAM to 333Mhz (667 effective). When I upped the voltage to 2.1v, manually set SPD to 800, and timings to 4-4-4-12, Windows would run for about 12 hours before locking up. memtest86+ also throws a bunch of errors a few seconds into the test. Only way memtest will pass testing is with the underclock (voltage still @ 2.1v), but the RAM only runs at 5-5-5-18 according to memtest.
Anyone have any suggestions on BIOS settings to get it to run stable at the RAM's proper settings?
Cheers,
athe.
I've recently installed 4GB of Corsair C4DHX (2x2GB) RAM onto my Gigabyte EP45-DS4P motherboard (only RAM installed).
However, the system will only run stable if I underclock the RAM to 333Mhz (667 effective). When I upped the voltage to 2.1v, manually set SPD to 800, and timings to 4-4-4-12, Windows would run for about 12 hours before locking up. memtest86+ also throws a bunch of errors a few seconds into the test. Only way memtest will pass testing is with the underclock (voltage still @ 2.1v), but the RAM only runs at 5-5-5-18 according to memtest.
Anyone have any suggestions on BIOS settings to get it to run stable at the RAM's proper settings?
Cheers,
athe.