Hey everybody, I have a problem with a new kit I bought this week
This is the Kit I bought
VENGEANCE® RGB RT 32GB (2 x 16GB) DDR4 DRAM 3600MHz C16 Memory Kit Corsair Link
When I try to run the ram with XMP enabled, it doesnt boot. I tried every speed between 3200 and 3600 but it only boots with 3200mhz
Is there anything I can do to fix it?
Here is my current setup
CPU : i5 6800k (running at 48x100mhz)
Motherboard : Asus TUF Z370-Plus Gaming (Bios date is 2018, havent updated since then)
Ram is currently running at 3200mhz 16-20-20-38 with 1.35V. They are installed on Slot 1 and 3
This is the Kit I bought
VENGEANCE® RGB RT 32GB (2 x 16GB) DDR4 DRAM 3600MHz C16 Memory Kit Corsair Link
When I try to run the ram with XMP enabled, it doesnt boot. I tried every speed between 3200 and 3600 but it only boots with 3200mhz
Is there anything I can do to fix it?
Here is my current setup
CPU : i5 6800k (running at 48x100mhz)
Motherboard : Asus TUF Z370-Plus Gaming (Bios date is 2018, havent updated since then)
Ram is currently running at 3200mhz 16-20-20-38 with 1.35V. They are installed on Slot 1 and 3