Hello everyone,
a year ago I bought a new pc, including the Corsair DDR4 Vengeance LPX 2x16GB 3200.
As mobo I bought the Taichi x470. Up then I used to have a problem to make the ram run at 3200Mhz. The problem was that in order to activate the dual channeling I needed to place the RAM in the 2nd and 4th slot. Problem solved up then without anything else to be touched!
Today out of curiosity I did some tests again and I see that they are back running at 2133 .. thing is that on CPU-Z the dual channeling is active
Any suggestion on how to proceed by any chance? Thank you!
Ps: I wish I could post some pics but it seems that there is a problem with the website and an error pops up when I try to attach one.
Edit: I also tried to manually set the profile to 3200Mhz in the Bios but that doesn't work. Computer restarts 3 times and at the end switches back to 2133
a year ago I bought a new pc, including the Corsair DDR4 Vengeance LPX 2x16GB 3200.
As mobo I bought the Taichi x470. Up then I used to have a problem to make the ram run at 3200Mhz. The problem was that in order to activate the dual channeling I needed to place the RAM in the 2nd and 4th slot. Problem solved up then without anything else to be touched!
Today out of curiosity I did some tests again and I see that they are back running at 2133 .. thing is that on CPU-Z the dual channeling is active
Any suggestion on how to proceed by any chance? Thank you!
Ps: I wish I could post some pics but it seems that there is a problem with the website and an error pops up when I try to attach one.
Edit: I also tried to manually set the profile to 3200Mhz in the Bios but that doesn't work. Computer restarts 3 times and at the end switches back to 2133