Question Could I fit my components from an ATX case into the CH160 BLACK

[Octavian4]

Hi, at this moment, after spending some time researching sizes for GPU, PSU, cooler and motheboard size I'm still not convinced if my ASRock B650M-H/M.2+ can fit in CH160.
My concern is its length of 244 mm and if the mounting screws will be aligned with those in the case. As for the other size issues, I believe I can manage them considering the "intel" I've gathered 'till this moment.
Other components:
RTX 3060 Eagle - gpu
SE-207-XT Advanced - cooler
SG-600B - psu
Can't wait for your guys thoughts

EDIT: I don't have the ch160 case at hand, neither do I have any other ITX cases around for testing purposes
2nd EDIT: I know that CH160 doesn't support mATX format, my question comes from a custom/non-conventional view, it's more of a what if scenario .

 

[COLGeek]

I do not believe that a microATX motherboard will fit into that case that is designed for mini-ITX motherboards.

These are not compatible together.

 

[SkyNetRising]

I'm still not convinced if my ASRock B650M-H/M.2+ can fit in CH160.

The case supports mITX boards only.
mATX are too large to fit in the case.

You can also determine this by counting PCIE slots.
Motherboard has space for 4 PCIE slots (3 existing slots plus one goes in location, where BIOS battery is located).
The case has space for 3 PCIE slots only. 4th slot doesn't fit into case anymore.

 

[COLGeek]

I think this particular case's design might mislead folks into thinking it can accommodate a larger motherboard. IT CANNOT.

Those slots are so the case can host a larger GPU. Many mini-ITX cases only have one or two slots.

 

[stuff and nonesense]

Mini ITX, 170mm x 170mm. 6.7” x 6.7”. The spec sheet for the CH160 makes no mention of any other board sizes. Only Mini ITX.