I just installed a new AIO cooler and system was IDLE in bios for about 2 minutes and CPU idle temps were at 62 degrees. I then booted, and fans started going ape shit at like 2700 rpm. I opened CPU HW monitor right as i got in and IDLE temps were at 95 degrees!!!! I’ve had my PC for about two years and I had a hyper T2 before I installed this AIO (CM MasterLiquid 240L RGB), and my temps were rarely if ever above 55. I am very concerned as to WTF is going on. I installed it properly and everything I’m pretty sure and all the fans are spinning. To me it didn’t seem like the AIO was doing fu** all. I don’t know what I’m gonna do now.
Currently sulking in depression..
Edit: Pls help me.
Important information: I cleaned the old thermal paste off of the CPU like 20 minutes before mounting the new heatspreader. There were some difficulties mounting the cpu block but I got it on eventually and it was tight and smug. My front fans(where the radiator is) are intakesc and the rear fans are still intakes as well, i still have to change that but it wouldn’t explain a 90 degree temp. (I know i shouldn’t have both fans as intake, i don’t need input on that.).
View: http://imgur.com/ntDmTyX
Currently sulking in depression..
Edit: Pls help me.
Important information: I cleaned the old thermal paste off of the CPU like 20 minutes before mounting the new heatspreader. There were some difficulties mounting the cpu block but I got it on eventually and it was tight and smug. My front fans(where the radiator is) are intakesc and the rear fans are still intakes as well, i still have to change that but it wouldn’t explain a 90 degree temp. (I know i shouldn’t have both fans as intake, i don’t need input on that.).
View: http://imgur.com/ntDmTyX
Last edited: