Archived from groups: microsoft.public.win98.gen_discussion (
More info?)
Well, if you are Networking, I suppose your settings are rightfully
different from mine. I am only checked... "For Microsoft Networking Use
These Rules Instead of Filter Rules". And my trusted addresses are a tad
different. But you had Kerio exited, & the problem persisted. Therefore,
it can't be that.
I guess you must get a response from your proxy server as to what those
rules should be.
Too bad "The scan function hangs at 0%" didn't work. You did try
"Windows Update is looking for available updates... 0% complete"? What
were your "LAN Settings"? Actually, I am only checked "Automatically
detect settings" there. I suppose you are checked to use the proxy
server, right? Here is the blurb for that...
"Specifies to connect to the Internet through a proxy server by using
the settings you specify. A proxy server acts as an intermediary between
your internal network (intranet) and the Internet, retrieving files from
remote Web servers."
--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR
pcrrcp@netzero.net
"Jorge" <open@closed.org> wrote in message
news:ezp5TrksFHA.2072@TK2MSFTNGP14.phx.gbl...
| Hello PCR
|
| First: YES I did all those below and did not help. I hoped the "The
scan
| function hangs at 0%" would solve it all as it is exactly what isd
| happening, but it did not!
|
| Now, Kerio (As I told you I have tried to download with Kerio off, so
I
| guess what is in the M/S Networking button might not be very useful)
|
| Allow Microsoft networking Name resolution = checked
| From trusted addresses only = checked
|
| Allow other users to accesss my shared folders/ printers = checked (I
had
| two computers networking before)
|
| From trustee adresses only = checked
|
| Trusted address group = 192.168.2.0/255.255.255.0
|
| Hope it helps.
|
| Jorge
|
|
|
|
| "PCR" <pcrrcp@netzero.net> wrote in message
| news:ek8pZmjsFHA.1168@TK2MSFTNGP11.phx.gbl...
| > I don't know about your proxy server. I'm sure we can figure how to
get
| > it right in Kerio, if that proves to be the problem. What shows at
| > "R-Clk Kerio in Tray, Administration, Advanced button, Microsoft
| > Networking button"?
| >
| > Well, are you tried BOTH solutions at...
| > http://v4.windowsupdate.microsoft.com/troubleshoot/
| >
| > This is the easier one...
| > .......Quote.............
| > Problem Description:
| > The Scan function hangs at 0%
| >
| > Resolutions:
| > Suggestion 1:
| >
| > Install the latest scripting engine 5.6 from:
| >
|
http://msdn.microsoft.com/library/default.asp?url=/downloads/list/webdev.asp
| >
| > Suggestion 2:
| >
| > Repair Internet Explorer
| >
| > 1. Open up Control Panel.
| > 2. Open Add/remove programs.
| > 3. Select Microsoft Internet Explorer and Internet Tools.
| > 4. Click Add/remove.
| > 5. Click Repair.
| > 6. Follow the steps provided by the Repair Wizard.
| > 7. Click OK
| > .......EOQ...............
| >
| > And, here is the tougher....
| > .......Quote..............
| > Problem Description:
| > After clicking Scan for Updates, you receive this message: "Windows
| > Update is looking for available updates... 0% complete.". Then the
site
| > stops communicating.
| >
| > Resolutions:
| > There are several possible solutions to this problem.
| >
| > Install the latest scripting engine 5.6 from:
| >
|
http://msdn.microsoft.com/library/default.asp?url=/downloads/list/webdev.asp
|
> ----------------------------------------------------------------------
--
| > --------
| > If you have Netsonic on your computer, uninstall it.
|
> ----------------------------------------------------------------------
--
| > --------
| > If you have not installed the latest version of Windows Update
software,
| > follow the
| > instructions in the article "Manual installation instructions for
| > Windows Update controls" on this page.
|
> ----------------------------------------------------------------------
--
| > --------
| > Disable the options "Automatically detect settings" and "Use
automatic
| > configuration script."
| > To do this:
| > 1. Open Internet Explorer.
| > 2. Click "Tools," and then click "Internet Options."
| > 3. Click "Connections," and then click "LAN Settings."
| > 4. Make sure the check boxes for "Automatically detect settings" and
| > "Use automatic configuration script" are not selected.
| >
| > Try to access the Windows Update site again.
| >
| > Also, verify that you can connect to SSL-enabled Web sites (sites
that
| > start with https://).
| >
| > Most online retailers use SSL (Secure Socket Layer) sites during the
| > checkout/payment process. If you've connected to one of these sites
in
| > the past then chances are that SSL is working correctly on your
| > computer. You can also test your ability to connect to SSL sites
using
| > a SSL test site like this:
| >
| >
https://www.stanford.edu/group/idg/leland/samples/secure/test.html
| >
| > If you cannot connect to SSL sites then the Windows Update scan will
not
| > work. Make sure that the SSL port (port 443) is open on your
network.
| > .......EOQ................
| >
| >
| > --
| > Thanks or Good Luck,
| > There may be humor in this post, and,
| > Naturally, you will not sue,
| > should things get worse after this,
| > PCR
| > pcrrcp@netzero.net
| > "Jorge" <open@closed.org> wrote in message
| > news:%23eiUSrisFHA.596@TK2MSFTNGP12.phx.gbl...
| > | Hello PCR/Brian/Dapper Dan
| > |
| > |
| > | I think I found out what the problem is:
| > | http://www.support.microsoft.com/kb/241783/EN-US/
| > |
| > | It looks as my server is blocking the download.
| > |
| > | Now I don't know how to go about points 1 and 2 of the Resolution
| > |
| > | RESOLUTION
| > | To resolve this issue, follow these steps:
| > |
| > | 1. Clear the proxy cache and configure it to exclude the Windows
| > Update
| > | site.
| > |
| > | Note See your software documentation or contact the software
| > manufacturer if
| > | you want help with the proxy server or firewall software
| > configuration.
| > |
| > | 2. Open port 80.
| > | 3. Add Windows Update to the Trusted Sites Zone.
| > |
| > |
| > | Can you help?
| > |
| > |
| > | "PCR" <pcrrcp@netzero.net> wrote in message
| > | news:O%23nyTVasFHA.2008@TK2MSFTNGP10.phx.gbl...
| > | > http://v4.windowsupdate.microsoft.com/troubleshoot/
| > | > There is at least one mention of your condition there. Go look.
| > | >
| > | > Is your system clock/date correct? If it is off by a lot
(months),
| > | > Windows update will not work.
| > | >
| > | > Here is one thing to try... Most of the following shall never
return
| > | > again, and were work files, pre-V4 Windows Update:
| > | >
| > | > (a) "START, Settings, Folder Options, View tab"; bolt "Show
all
| > | > files" & UNcheck "Hide file extensions...".
| > | > (b) Open Explorer to "C:\Program Files\WindowsUpdate", and
| > | > (c) Delete everything in this folder EXCEPT the V4 folder.
| > | > (d) Open the V4 folder, and delete everything in it EXCEPT
for
| > the
| > | > "iuhist.xml" file.
| > | >
| > | > Try the other measures in this URL...
| > | >
http://support.microsoft.com/?kbid=319585
| > | > WINUP: "Software Update Incomplete, This Windows Update Software
Did
| > Not
| > | > Update Successfully" Error Message When You Visit the Windows
Update
| > Web
| > | > Site
| > | >
| > | > Here's another one...
| > | >
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q243787
| > | > WINUP: Error Message: Cannot Display Page
| > | >
| > | >
| > | > --
| > | > Thanks or Good Luck,
| > | > There may be humor in this post, and,
| > | > Naturally, you will not sue,
| > | > should things get worse after this,
| > | > PCR
| > | > pcrrcp@netzero.net
| > | > "Jorge" <open@closed.org> wrote in message
| > | > news:ezP0TUYsFHA.3596@TK2MSFTNGP15.phx.gbl...
| > | > | I have changed from very fast cable to slow phone connection.
| > | > |
| > | > | Even though I manage most downloads, I am unable to get
Windows
| > Update
| > | > to
| > | > | work.
| > | > |
| > | > | The page open I click yes and then the screen stays with the
| > message
| > | > that it
| > | > | is checking but never changes from 0%.
| > | > |
| > | > | What cab going wrong?
| > | > |
| > | > | I need to get the latest updates (I've been away for 2 months)
and
| > am
| > | > Stuck.
| > | > |
| > | > | I have 98SE
| > | > |
| > | > |
| > | > | Help..
| > | > |
| > | > |
| > | > |
| > | > |
| > | > |
| > | > |
| > | >
| > | >
| > |
| > |
| >
| >
|
|