Hi there !
After many years I decided to replace thermal pad on the VRM section of the motherboard. I used 1mm Arctic Thermal Pad 6.0 W/mK ( this brand is the only available on my region with 0.5, 1 and 1.5 mm thickness variations). After replacing I noticed upper and lover sides of the Thermal pad is roughly squished but middle pat was barely touched as I explained in the picture. Any ideas to solve this ?
After many years I decided to replace thermal pad on the VRM section of the motherboard. I used 1mm Arctic Thermal Pad 6.0 W/mK ( this brand is the only available on my region with 0.5, 1 and 1.5 mm thickness variations). After replacing I noticed upper and lover sides of the Thermal pad is roughly squished but middle pat was barely touched as I explained in the picture. Any ideas to solve this ?