Question D.O.C.P makes my games crash

[Djizox]

Hi, when enabling the D.O.C.P profile with my RAM to 3600Mhz, my PC boots and I can play games, but with a random time interval from 5 min to 4 hours, it just crashes to desktop without error messages.
Mostly after a crash in GTA V and I reopen, it crashes within 5-10 min 3-5 times in a row. So unplayable.

Manual OC of ram is super confusing for me if that could make more stability.
System is crash less with the profile turned off but RAM is running 2133Mhz.

Specs:
Asus Strix B550-F gaming
AMD Ryzen 7 5800x
Asus GTX 1080 Strix A8gb
Corsair vengeance RGB PRO SL 3600Mhz QC
Samsung EVO plus 970
Corsair RM750i

BIOS should be updated to latest stable.
Right now I'm running a auto OC through Ryzen master.

All tests like memtest86 OCCT shows no errors or unstable results.
So testing each setting takes waaaay to long.
Around the 4-5hour mark a crash should have happened...

 

[Ralston18]

This:

"it just crashes to desktop without error messages."

Are you looking in Reliability History and Event Viewer?

Either one or both may be capturing errors codes, warnings, or even related informational events.

How old is that Corsair PSU? Heavy use for gaming, video editing, or even bit-mining?

The PSU may be at some threshold condition (maybe heat related) where once that threshold is eventually hit then the system crashes.

Afterwards the PSU takes a while to cool down and start working again.

Or at least until the next "heat up".

 

[Djizox]

Have monitored heat and voltage nothing out of ordinary.
PSU is around 4 years with almost daily use of YT and gaming.
Only error code, is in LauncherLog from Rockstar launcher. and rarely shows up in event veiwer.
Launcher.log

[2021-09-17 19:35:55.010] [DISPLAY] [ 2276] [gamelaunch] Game exited with code 0xc0000005 (3221225477)
[2021-09-17 19:35:55.025] [DISPLAY] [ 2276] [crashdetection] Game left no exit file.
[2021-09-17 19:35:55.026] [ ERROR ] [ 2276] [crashdetection] Exit code 0xc0000005 indicates a fatal game exit (reason: STATUS_ACCESS_VIOLATION)

 

[Djizox]

 

[Djizox]

Well got it to run 3600 mhz now. but with alittle higher clocks. just incresed DRAM volt to 1.4 and SOC to 1.1 disabled Powerdown insted of auto, and set tCL to 18 and the rest on auto.
so is it bad to run 18-25-25-25-58 insted of 18-22-22-22-42???

 

[Djizox]

This:

"it just crashes to desktop without error messages."

Are you looking in Reliability History and Event Viewer?

Either one or both may be capturing errors codes, warnings, or even related informational events.

How old is that Corsair PSU? Heavy use for gaming, video editing, or even bit-mining?

The PSU may be at some threshold condition (maybe heat related) where once that threshold is eventually hit then the system crashes.

Afterwards the PSU takes a while to cool down and start working again.

Or at least until the next "heat up".

It's my RAM, got it to run other clock speeds cause my newly bought RAM is not verified to my motherboard.
i got my ram to other clock speeds, so it's not crashing anymore. but is it bad to run 18-25-25-25-58 insted of 18-22-22-22-48 (XMP clocks with crash) ?
look abouve for pictures

 

[ellednarb666]

It's my RAM, got it to run other clock speeds cause my newly bought RAM is not verified to my motherboard.
i got my ram to other clock speeds, so it's not crashing anymore. but is it bad to run 18-25-25-25-58 insted of 18-22-22-22-48 (XMP clocks with crash) ?
look abouve for pictures

Have you tried manually setting 18-22-22-22-48 timings?

 

[Djizox]

Have you tried manually setting 18-22-22-22-48 timings?

Yep. Same result

 

[ellednarb666]

I think it will be better to run on 3200 16-18-18-42 than 3600 18-25-25-25-58. Try to benchmark using AIDA64 and compare the results