I'm building my 1st custom loop and have an Alphacool VPP755 V2 D5 pump and have just upgraded to Ryzen on a Gigabyte Aorus Gaming 5 mobo. The board has two 4 pin fan headers marked sys fan 5 & 6 Pump on the far right and bottom right of the board which the manual says are for "System fan/water cooling pump headers" but the D5's 4 pin fan cable won't stretch to them.
I can reach the 4 pin SysFan 1 connector beside the 8 pin PSU connector at the top of the board. Are the dedicated pump headers made for AIO's or do I have to plug my D5 into them. Does it really matter which header I use. Am I right in thinking the fan header is only for PWM control as the D5 is also plugged into separate molex for power. Cheers.
I can reach the 4 pin SysFan 1 connector beside the 8 pin PSU connector at the top of the board. Are the dedicated pump headers made for AIO's or do I have to plug my D5 into them. Does it really matter which header I use. Am I right in thinking the fan header is only for PWM control as the D5 is also plugged into separate molex for power. Cheers.