- Jul 30, 2014
- 6,996
- 172
- 41,140
Hello...
I have issues with overclocking my ram.
Basicly if i do higher speed than intended lets say 2100MHz to 2400Mhz (From stock 1866), my PC would boot loop instantly upon saving, which i get as failed oc.
No memOK will show up, just goes straight trought the Q codes to around 50~ and restarts itself.
To fix that either cmos reset or hold memOK button will do the trick.
If i overclock from stock 1866 to 2100MHz it would save and boot up normally.
Tested with HCK and Intel Burn test (10 passes).
https://valid.x86.fr/klks6c
I've used 1.650V, released timings from 10-11-10-30 2T to 12-12-12-36 1T and still happens with LLC on ram.
I have not touched any other voltages.
And yes if i oced to 2100MHz which is stable at 11-11-11-33 1T i gain fps boost of 10fps on most of games.
Soo in short, why does the motherboard boot loop? Are there any other settings to improve or?
Also to note: Sometimes it would show Q code 55 and i have to use 1 stick and reseat to every slot until it start to boot again and then i can plug the last stick.
Specs:
CPU- Xeon E3-1225v3
Motherboard- Asus Maximus Hero VII (latest bios)
Ram- Kingston HyperX fury black 1866 10-11-10-30 2T (by stock)
GPU-R9 280 Dual-X
PSU-Delta TDPS - 650BB A 650W server class PSU
Storage-1TB P300 Toshiba, 500GB WD blue.
I have issues with overclocking my ram.
Basicly if i do higher speed than intended lets say 2100MHz to 2400Mhz (From stock 1866), my PC would boot loop instantly upon saving, which i get as failed oc.
No memOK will show up, just goes straight trought the Q codes to around 50~ and restarts itself.
To fix that either cmos reset or hold memOK button will do the trick.
If i overclock from stock 1866 to 2100MHz it would save and boot up normally.
Tested with HCK and Intel Burn test (10 passes).
https://valid.x86.fr/klks6c
I've used 1.650V, released timings from 10-11-10-30 2T to 12-12-12-36 1T and still happens with LLC on ram.
I have not touched any other voltages.
And yes if i oced to 2100MHz which is stable at 11-11-11-33 1T i gain fps boost of 10fps on most of games.
Soo in short, why does the motherboard boot loop? Are there any other settings to improve or?
Also to note: Sometimes it would show Q code 55 and i have to use 1 stick and reseat to every slot until it start to boot again and then i can plug the last stick.
Specs:
CPU- Xeon E3-1225v3
Motherboard- Asus Maximus Hero VII (latest bios)
Ram- Kingston HyperX fury black 1866 10-11-10-30 2T (by stock)
GPU-R9 280 Dual-X
PSU-Delta TDPS - 650BB A 650W server class PSU
Storage-1TB P300 Toshiba, 500GB WD blue.
Facebook
Twitter
Instagram