I have a donated HP Pavilion a1610n PC. ASUS A8M2N-LA motherboard, AMD Athlon 64 X2 4200+ 1GB (512x2) PC2-4200 RAM.
When I went to power it on to check it out, it turned on, and the cpu fan immediately spun up to what seems like full speed, but that's it. No video (the monitor's light stays orange), nothing. No beeps either.
I went through the usual steps for this kind of thing...stripped it down to just the PS and 1 RAM stick. Didn't work, so I took out the RAM to get a beep code, but there's no sound. I swapped the DIMM's between slots in case one was bad. Nothing. Then I changed the PS to a 290W (it had a 180W). Didn't work either. I suspected a dead VGA port, so I stuck in a PCI video card, and that didn't work. I added a HDD, and I can hear it spin up and try to work (there's no OS on it), but no luck there. I know all of the stuff I put it works (came from other working machines).
The MB looks good physically. I'm not sure about the CPU, and I can't test it as I don't have any AM2 CPU's or MB's laying around. So I'm at a loss here. I did clear the CMOS as well, but it didn't work.
I was hoping to fix and sell this machine (I do that frequently when I get free machines), but it's looking like a lemon. Again, everything powers on, but no video on the monitor, no beeps.
Is the cpu dead, or the motherboard? I also tried taking the cpu out and reseating it to no effect.
Ant suggestions our input would be great.
Thanks!
When I went to power it on to check it out, it turned on, and the cpu fan immediately spun up to what seems like full speed, but that's it. No video (the monitor's light stays orange), nothing. No beeps either.
I went through the usual steps for this kind of thing...stripped it down to just the PS and 1 RAM stick. Didn't work, so I took out the RAM to get a beep code, but there's no sound. I swapped the DIMM's between slots in case one was bad. Nothing. Then I changed the PS to a 290W (it had a 180W). Didn't work either. I suspected a dead VGA port, so I stuck in a PCI video card, and that didn't work. I added a HDD, and I can hear it spin up and try to work (there's no OS on it), but no luck there. I know all of the stuff I put it works (came from other working machines).
The MB looks good physically. I'm not sure about the CPU, and I can't test it as I don't have any AM2 CPU's or MB's laying around. So I'm at a loss here. I did clear the CMOS as well, but it didn't work.
I was hoping to fix and sell this machine (I do that frequently when I get free machines), but it's looking like a lemon. Again, everything powers on, but no video on the monitor, no beeps.
Is the cpu dead, or the motherboard? I also tried taking the cpu out and reseating it to no effect.
Ant suggestions our input would be great.
Thanks!