Hi Folks. Long time lurker, first time poster etc...
I'm having a strange problem with 2 PC's.
First of all, I recently managed to fry my motherboard (ASUS A7V266-E) because of my PSU. It fried all the connectors on the mobo. It lead to me buying a new PSU, but the mobo was replaced under warranty (luckilly!).
Anyway, the mobo came back on last week (a replacement board), so I installed the CPU (Athlon XP 1800+), RAM & video card (ASUS FX5600 variety). The PC switches on, the fans all start up etc, but there's no display. There's no beeps or anything. Even removing the RAM & video card results in the same thing. So I put it down to the CPU being fried as I've tested the RAM & video card in my work P4 system...
Put that system on hold for a minute as I describe the 2nd system...
I was given a PC to fix from one of my mothers friends (Athlon XP 1900+ system). It was making a beeping sound when it was switched on. Being a Gigabyte GA-7DX board, it has an Award BIOS, so I looked up the beep codes. Unfortunately it doesn't exist! So I removed the RAM & Video card etc, only to get the same beep.
Eventually I put it aside for a few days in frustration.
On the weekend, I had another look at the 2nd system again. This time, there's no beeps. The system just powers up, but doesn't POST or beep...exactly the same problem as with my own PC. Now it's getting very strange...
I've tried 3 different video cards, 2 different monitors & even swapped CPU's. But still nothing. Bare power & that's it.
Is it Murphy's Law that both systems have dead CPU's? Or is it something obviously stupid that I'm missing? Yes...the monitor was plugged in & switched on!
Thanks in advance for any help.
Cheers,
Jimbo.
I'm having a strange problem with 2 PC's.
First of all, I recently managed to fry my motherboard (ASUS A7V266-E) because of my PSU. It fried all the connectors on the mobo. It lead to me buying a new PSU, but the mobo was replaced under warranty (luckilly!).
Anyway, the mobo came back on last week (a replacement board), so I installed the CPU (Athlon XP 1800+), RAM & video card (ASUS FX5600 variety). The PC switches on, the fans all start up etc, but there's no display. There's no beeps or anything. Even removing the RAM & video card results in the same thing. So I put it down to the CPU being fried as I've tested the RAM & video card in my work P4 system...
Put that system on hold for a minute as I describe the 2nd system...
I was given a PC to fix from one of my mothers friends (Athlon XP 1900+ system). It was making a beeping sound when it was switched on. Being a Gigabyte GA-7DX board, it has an Award BIOS, so I looked up the beep codes. Unfortunately it doesn't exist! So I removed the RAM & Video card etc, only to get the same beep.
Eventually I put it aside for a few days in frustration.
On the weekend, I had another look at the 2nd system again. This time, there's no beeps. The system just powers up, but doesn't POST or beep...exactly the same problem as with my own PC. Now it's getting very strange...
I've tried 3 different video cards, 2 different monitors & even swapped CPU's. But still nothing. Bare power & that's it.
Is it Murphy's Law that both systems have dead CPU's? Or is it something obviously stupid that I'm missing? Yes...the monitor was plugged in & switched on!
Thanks in advance for any help.
Cheers,
Jimbo.